SKF SYK 20 TR Plummer Block House -, 20 mm ID

This plummer Block housing provides a mounted bearing solution for supporting rotating shafts in industrial systems. Designed for equipment in automation, electronics and mechanical installations, it accommodates a cylindrical shaft and offers a Compact footprint for in-line or base-mounted arrangements. The housing is manufactured to recognised standards and suits medium-duty rotating assemblies where set-screw retention is preferred.

• 12.7 kN dynamic load capacity supports moderate radial loads
• 6.55 kN static load rating resists stationary forces during shutdowns
• 5 000 r/min limiting speed enables high-speed operation where required
• Set-screw locking secures the shaft without additional components
• Composite construction reduces weight and corrosion risk
• 96.5mm mount hole centre-to-centre simplifies bolt alignment

• Suitable for conveyor rollers in automated production lines
• Ideal for motor shaft support in electrical assemblies
• Used with gearbox inputs in light mechanical drives
• Can be used for test rigs requiring removable bearings

It accepts a 20mm cylindrical shaft and is intended for that bore size.

The unit uses two bolts through 10mm mounting holes for secure fixation.

The centre height is 33.3mm, defining the shaft elevation above the base.

The housing extends to a length of 126mm, which should be accommodated in the assembly.