INA GE30-FW-2RS-A 30 mm Bore Plain Bearing, 55 mm OD, 353 kN
- RS庫存編號:
- 191-3877
- 製造零件編號:
- GE30-FW-2RS-A
- 製造商:
- INA
可享批量折扣
小計（1 件）*
TWD4,901.00
(不含稅)
TWD5,146.05
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD4,901.00 |
| 13 - 24 | TWD4,764.00 |
| 25 + | TWD4,691.00 |
* 參考價格
- RS庫存編號:
- 191-3877
- 製造零件編號:
- GE30-FW-2RS-A
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Plain Bearing | |
| Bore Size | 30mm | |
| Outside Diameter | 55mm | |
| Static Load Rating - Radial | 353kN | |
| Standards/Approvals | No | |
| Series | GE | |
| Width | 32mm | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Plain Bearing | ||
Bore Size 30mm | ||
Outside Diameter 55mm | ||
Static Load Rating - Radial 353kN | ||
Standards/Approvals No | ||
Series GE | ||
Width 32mm | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
相關連結
- INA GE30-PB 30 mm Bore Plain Bearing 159 kN
- INA GE30-FO-2RS 30 mm Bore Plain Bearing 357000 N
- INA GE35-DO-2RS 35 mm Bore Plain Bearing 400 kN
- INA GE30-DO-2RS 30 mm Bore Plain Bearing 271000 N
- INA GE30-UK-2RS-A 30 mm Bore Plain Bearing 275000 N
- INA GE20-FW 20 mm Bore Plain Bearing 128 kN
- INA GE40-FW-2RS-A 40 mm Bore Plain Bearing 600000 N
- INA GE40-DO-2RS 40 mm Bore Plain Bearing 496 kN