Block 2 x 9 V ac 2 Output Pin PCB Transformer, cURus, ENEC 10 (VDE), UL 5085-1/-2, CSA 22.2 No.66, EN 61558-2-6, VDE
- RS庫存編號:
- 347-3524
- 製造零件編號:
- VB 3.2/2/9
- 製造商:
- Block
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD205.00
(不含稅)
TWD215.25
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD205.00 |
| 13 - 24 | TWD199.00 |
| 25 + | TWD194.00 |
* 參考價格
- RS庫存編號:
- 347-3524
- 製造零件編號:
- VB 3.2/2/9
- 製造商:
- Block
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Block | |
| Product Type | PCB Transformer | |
| Secondary Voltage | 2 x 9 V ac | |
| Primary Voltage | 230 V ac | |
| Number of Outputs | 2 | |
| Length | 41mm | |
| Width | 30.8mm | |
| Depth | 35mm | |
| Power | 3.2VA | |
| Weight | 0.17kg | |
| Mount Type | Pin | |
| Efficiency | 58% | |
| Maximum Operating Temperature | 50°C | |
| Minimum Operating Frequency | 50Hz | |
| Series | VB 3 | |
| Maximum Operating Frequency | 60Hz | |
| Standards/Approvals | cURus, ENEC 10 (VDE), UL 5085-1/-2, CSA 22.2 No.66, EN 61558-2-6, VDE 0570 Part 2-6, IEC 61558-2-6, DIN EN 61558-2-6 | |
| 選取全部 | ||
|---|---|---|
品牌 Block | ||
Product Type PCB Transformer | ||
Secondary Voltage 2 x 9 V ac | ||
Primary Voltage 230 V ac | ||
Number of Outputs 2 | ||
Length 41mm | ||
Width 30.8mm | ||
Depth 35mm | ||
Power 3.2VA | ||
Weight 0.17kg | ||
Mount Type Pin | ||
Efficiency 58% | ||
Maximum Operating Temperature 50°C | ||
Minimum Operating Frequency 50Hz | ||
Series VB 3 | ||
Maximum Operating Frequency 60Hz | ||
Standards/Approvals cURus, ENEC 10 (VDE), UL 5085-1/-2, CSA 22.2 No.66, EN 61558-2-6, VDE 0570 Part 2-6, IEC 61558-2-6, DIN EN 61558-2-6 | ||
- COO (Country of Origin):
- DE
Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Approvals
ENEC 10; UL recognised component
Standards
EN 61558
相關連結
- Block 9 V ac 1 Output Through Hole PCB Transformer CSA 22.2 VDE
- Block 2 x 9 V ac 2 Output Pin PCB Transformer EN 61558-2-6 ENEC 10 (VDE)
- Block 2 Output 630 VA Chassis Mount Transformer CSA 22.2 No.66 VDE 0570 cURus,
- Block 2 x 15 V ac 2 Output Pin PCB Transformer cURus UL 5085-1/-2 IEC
- Block 2 x 12 V ac 2 Output Pin PCB Transformer ENEC 10 (VDE) EN 61558-2-6, UL
- Block 2 x 15 V ac 2 Output Pin PCB Transformer VDE UL 5085-1/-2 VDE 0570 Part
- Block 9 V ac 1 Output Pin PCB Transformer VDE 0570 Part 2-6 IEC 61558-2-6, ENEC
- Block 24 V ac 1 Output Pin PCB Transformer IEC 61558-2-1 DIN EN 61558-2-1, VDE 0570