Lumberg Minimodul Series Straight Through Hole PCB Header, 16 Contact(s), 2.5 mm Pitch, 1 Row, Shrouded
- RS庫存編號:
- 737-8619
- 製造零件編號:
- 2,5 MSF/O 16
- 製造商:
- Lumberg
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 10 件）*
TWD310.00
(不含稅)
TWD325.50
(含稅)
訂單超過 $1,300.00 免費送貨
庫存資訊目前無法查詢
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 60 | TWD31.00 | TWD310.00 |
| 70 - 120 | TWD30.20 | TWD302.00 |
| 130 + | TWD29.70 | TWD297.00 |
* 參考價格
- RS庫存編號:
- 737-8619
- 製造零件編號:
- 2,5 MSF/O 16
- 製造商:
- Lumberg
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Lumberg | |
| Product Type | PCB Header | |
| Series | Minimodul | |
| Pitch | 2.5mm | |
| Current | 5A | |
| Housing Material | Glass Filled Polyamide | |
| Number of Contacts | 16 | |
| Number of Rows | 1 | |
| Orientation | Straight | |
| Shrouded/Unshrouded | Shrouded | |
| Connector System | Wire-to-Board | |
| Mount Type | Through Hole | |
| Contact Plating | Tin | |
| Contact Material | Brass | |
| Minimum Operating Temperature | -40°C | |
| Termination Type | Solder | |
| Maximum Operating Temperature | 120°C | |
| Contact Gender | Male | |
| Standards/Approvals | DIN EN 60664/IEC 60664, IEC 60335-1, IEC 60695-2-11 | |
| Voltage | 160 V | |
| 選取全部 | ||
|---|---|---|
品牌 Lumberg | ||
Product Type PCB Header | ||
Series Minimodul | ||
Pitch 2.5mm | ||
Current 5A | ||
Housing Material Glass Filled Polyamide | ||
Number of Contacts 16 | ||
Number of Rows 1 | ||
Orientation Straight | ||
Shrouded/Unshrouded Shrouded | ||
Connector System Wire-to-Board | ||
Mount Type Through Hole | ||
Contact Plating Tin | ||
Contact Material Brass | ||
Minimum Operating Temperature -40°C | ||
Termination Type Solder | ||
Maximum Operating Temperature 120°C | ||
Contact Gender Male | ||
Standards/Approvals DIN EN 60664/IEC 60664, IEC 60335-1, IEC 60695-2-11 | ||
Voltage 160 V | ||
Minimodul Vertical Headers
These Lumberg Minimodul™ vertical pin headers mate with crimp contact housings (3114 Series).
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
相關連結
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded
- Lumberg Minimodul Series Straight Through Hole PCB Header 2.5 mm Pitch Shrouded