JST PH Series Straight Through Hole PCB Header, 12 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- RS庫存編號:
- 175-5669
- 製造零件編號:
- B12B-PH-K-S (LF)(SN)
- 製造商:
- JST
可享批量折扣
小計（1 包，共 10 件）*
TWD146.00
(不含稅)
TWD153.30
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 190 件從 2025年12月29日 起發貨
- 加上 640 件從 2026年1月05日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 40 | TWD14.60 | TWD146.00 |
| 50 - 90 | TWD14.30 | TWD143.00 |
| 100 - 240 | TWD13.90 | TWD139.00 |
| 250 - 490 | TWD13.50 | TWD135.00 |
| 500 + | TWD13.30 | TWD133.00 |
* 參考價格
- RS庫存編號:
- 175-5669
- 製造零件編號:
- B12B-PH-K-S (LF)(SN)
- 製造商:
- JST
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | JST | |
| Series | PH | |
| Product Type | PCB Header | |
| Pitch | 2mm | |
| Current | 2A | |
| Number of Contacts | 12 | |
| Housing Material | Polyamide | |
| Number of Rows | 1 | |
| Orientation | Straight | |
| Shrouded/Unshrouded | Shrouded | |
| Connector System | Wire-to-Board | |
| Mount Type | Through Hole | |
| Contact Material | Brass | |
| Contact Plating | Tin | |
| Row Pitch | 2mm | |
| Termination Type | Crimp | |
| Minimum Operating Temperature | -25°C | |
| Contact Gender | Male | |
| Maximum Operating Temperature | 85°C | |
| Mating Pin Length | 3.3mm | |
| Standards/Approvals | No | |
| Voltage | 100 V | |
| 選取全部 | ||
|---|---|---|
品牌 JST | ||
Series PH | ||
Product Type PCB Header | ||
Pitch 2mm | ||
Current 2A | ||
Number of Contacts 12 | ||
Housing Material Polyamide | ||
Number of Rows 1 | ||
Orientation Straight | ||
Shrouded/Unshrouded Shrouded | ||
Connector System Wire-to-Board | ||
Mount Type Through Hole | ||
Contact Material Brass | ||
Contact Plating Tin | ||
Row Pitch 2mm | ||
Termination Type Crimp | ||
Minimum Operating Temperature -25°C | ||
Contact Gender Male | ||
Maximum Operating Temperature 85°C | ||
Mating Pin Length 3.3mm | ||
Standards/Approvals No | ||
Voltage 100 V | ||
- COO (Country of Origin):
- MY
This is a Thin, Low-Profile 2.0mm Pitch Connector 8.0mm in Height After Mounting and 4.5mm in Width. It is Designed to Meet The Demand for High-Density Connection of internal Wire to Printed Circuit Broads. It is Compact, Highly Reliable and Low in Cost.
The dimple at the center of the contact ensures positive contact and low contact resistance at all times.
The contact has a long wire strip holding length of 2.6 +/-0.4mm.
Fully shrouded header
The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.
相關連結
- JST PH Series Straight Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Straight Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Straight Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Straight Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Straight Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Right Angle Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Right Angle Through Hole PCB Header 2 mm Pitch Shrouded
- JST PH Series Right Angle Through Hole PCB Header 2 mm Pitch Shrouded