TE Connectivity 2481779-5 Series Vertical Surface PCB Header, 5 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded
- RS庫存編號:
- 671-467
- 製造零件編號:
- 2481779-5
- 製造商:
- TE Connectivity
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 卷，共 1400 件）*
TWD82,752.00
(不含稅)
TWD86,889.60
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
卷 | 每卷 | 每單位* |
|---|---|---|
| 1 + | TWD82,752.00 | TWD59.109 |
* 參考價格
- RS庫存編號:
- 671-467
- 製造零件編號:
- 2481779-5
- 製造商:
- TE Connectivity
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | TE Connectivity | |
| Product Type | PCB Header | |
| Series | 2481779-5 | |
| Pitch | 1.5mm | |
| Current | 3A | |
| Number of Contacts | 5 | |
| Housing Material | Liquid Crystal Polymer | |
| Number of Rows | 1 | |
| Orientation | Vertical | |
| Shrouded/Unshrouded | Shrouded | |
| Mount Type | Surface | |
| Connector System | Wire-to-Board | |
| Contact Material | Copper Alloy | |
| Contact Plating | Tin over Nickel | |
| Termination Type | Surface Mount | |
| Minimum Operating Temperature | 40°C | |
| Row Pitch | 1.5mm | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | UL 94V-0 | |
| Voltage | 50V | |
| 選取全部 | ||
|---|---|---|
品牌 TE Connectivity | ||
Product Type PCB Header | ||
Series 2481779-5 | ||
Pitch 1.5mm | ||
Current 3A | ||
Number of Contacts 5 | ||
Housing Material Liquid Crystal Polymer | ||
Number of Rows 1 | ||
Orientation Vertical | ||
Shrouded/Unshrouded Shrouded | ||
Mount Type Surface | ||
Connector System Wire-to-Board | ||
Contact Material Copper Alloy | ||
Contact Plating Tin over Nickel | ||
Termination Type Surface Mount | ||
Minimum Operating Temperature 40°C | ||
Row Pitch 1.5mm | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals UL 94V-0 | ||
Voltage 50V | ||
不相容
- COO (Country of Origin):
- CN
The TE Connectivity Mini CT Low Profile Inverted Through Board Connectors provide a small form factor solution to bring power into a conventional or aluminium-clad printed circuit board from the underside of the board. This addresses the challenges of dressing wires on the TOP side of LED boards resulting in low profile, less obstructed PCB layout designs. The headers mate with 1.5 mm centreline AMP Mini CT cable assemblies. They facilitate a simpler assembly of solid state LED lighting for architectural, residential, and commercial applications. The connector is positioned through a cutout or notch in PCB and sits only 1.6mm above the board and surface mount hold downs provide stability during connector mating and unmating. The low profile form factor, combined with a rounded edge design allows for minimal shadowing in lighting applications.
Reduced shadowing in lighting applications
Low profile design of 1.6mm above the board
Mates with economical Mini CT plugs
High temperature material for reflow processing
Flat TOP surface allows for vacuum pick up
Tape and reel packaging for high speed SMT processing
RoHS compliant
Applications
Indoor and outdoor lighting fixtures
General LED illumination fixtures
LED lighting controls
Various non lighting applications that require wire dress connections below the PCB
相關連結
- TE Connectivity 2481779-5 Series Vertical Surface PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity 2481779-2 Series Vertical Surface PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity 2481779-4 Series Vertical Surface PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header 1.5 mm Pitch Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header 1.5 mm Pitch Shrouded