最近搜索

    Pico Technology TA Series TA044 Oscilloscope Probe, Active, Differential Type, 70MHz, 1:100, 1:1000, 5kV Max

    RS庫存編號:
    898-6750
    製造零件編號:
    TA044
    製造商:
    Pico Technology
    Pico Technology
    查看所有Oscilloscope Probes
    9 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD34,317.00

    您付款

    TWD28,923.00

    (不含稅)

    TWD30,369.15

    (含稅)

    單位Per unit
    1 +TWD28,923.00
    RS庫存編號:
    898-6750
    製造零件編號:
    TA044
    製造商:
    Pico Technology
    COO (Country of Origin):
    TW

    產品概覽和技術數據資料表


    法例與合規

    COO (Country of Origin):
    TW

    產品詳細資訊

    Pico Technology Oscilloscope Probe


    The Pico Technology TA044 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±7000V. It can be used with a signal speed of up to 70Hz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

    By selecting attenuation ratio 1:100, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:1000.

    Features and Benefits


    Bandwidth is DC to 70MHz (–3dB)
    Attenuation ratio is 100:1/1000:1
    Accuracy is ±2%
    Input impedance is 10Mohm ll10pF each side to ground
    Differential range is (100:1) ±700V (DC + peak AC) or 700VRMS
    Maximum differential is (1000:1) ±7000V (DC + peak AC) or 5000VRMS
    Common mode range is ±7000V (DC + peak AC) or 2500VRMS (100:1 & 1000:1)
    Absolute maximum voltage is ±7000V (DC + peak AC) or 2500VRMS (100:1 & 1000:1)
    Absolute maximum voltage is (differential mode) ±7000V (DC + peak AC) or
    5000VRMS (100:1 & 1000:1)
    Swing is ±7V into 50kohm load
    Offset (typical) is <±5mV
    Noise (typical) is 0.9mVRMS
    Source impedance is (typical) 50ohm
    CMRR (typical) is 80dB at 6Hz and 50dB at 1MHz
    Ambient operating temperature ranges between -10°C and 40°C
    Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor
    Input lead length 600 mm
    BNC lead length 900 mm
    Dimensions (LxWxH): 202 x 83 x 38 mm

    Applications


    Safe measurement in power circuit
    Acquisition of low speed balanced differential signals found in serial communications buses
    Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
    Signals in the milliV range from sensors and other instrumentation

    Certifications


    IEC-1010.2-031 CAT I certified
    Pollution Degree 2 certified

    Note

    The spring hooks supplied with this probe are rated at 1000 V.

    規格

    屬性
    Probe TypeActive, Differential
    Attenuation1:100, 1:1000
    Bandwidth70MHz
    Maximum Common Mode Input Voltage5kV
    Connector TypeBNC
    Model Number pTA044
    Number of Probes2
    Safety Category LevelCAT I
    SeriesTA
    Safety Category2500 V, CAT I 7000V
    Rise Time5ns
    9 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD34,317.00

    您付款

    TWD28,923.00

    (不含稅)

    TWD30,369.15

    (含稅)

    單位Per unit
    1 +TWD28,923.00