The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance. Supplied with: Retractable hook tip Ground spring Ground lead with alligator clip Note: All the products in this range are supplied for use with instruments with a permanent earth connection.
Features and Benefits
Bandwidth is DC to 200MHz Attenuation ratio is 1:10 Input impedance is 10Mohmll12pF Length is 1.3m Maximum common-mode input voltage is 300KV Maximum Input voltage is 300 VRMS CAT II Wide compensation ranges between 15pF and 25pF)
Applications
Relative low frequency measurements Low frequency computer and telecom measurements Power supplies Low frequency amplifiers
Certifications
UL61010-031 approved 2007, CAN/CSA C22.2 No. 61010-031-07 certified IEC61010-031 IEC 61010-031/A1:2008 CAT I 400 VAC CAT II 300 V CAT II 300 VAC
