Vishay DC Input Optocoupler, Through Hole, 8-Pin DIP

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Optocouplers
暫時無法供應
我們不知道此物品是否會到貨，因為製造商正在對其逐步停產。
RS庫存編號:
180-7143
製造零件編號:
MCT6
製造商:
Vishay
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Vishay

Product Type

Optocoupler

Mount Type

Through Hole

Maximum Forward Voltage

1.5V

Number of Channels

1

Number of Pins

8

Package Type

DIP

Input Current Type

DC

Maximum Input Current

60mA

Isolation Voltage

5.3kVrms

Logic Output

Yes

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

100°C

Maximum Current Transfer Ratio

50%

Standards/Approvals

CSA 93751, DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending, IEC 60065, UL1577, BSI IEC 60950

Minimum Current Transfer Ratio

20%

Series

MCT6

Automotive Standard

No

The MCT6 is a two channel optocoupler for high density applications. Each channel consists of an optically coupled pair with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The MCT6 is especially designed for driving medium-speed logic, where it may be used to eliminate troublesome ground loop and noise problems. It can also be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation.

Current transfer ratio, 50 % typical

Leakage current, 1.0 nA typical

Two isolated channels per package

相關連結