Rhopoint A210-091 Handheld Ohmmeter, 100 μΩ, 4 Wire

RS庫存編號:: 611-953
製造零件編號:: M210
製造商:: Rhopoint

Rhopoint A210-091 Handheld Ohmmeter, 100 μΩ, 4 Wire

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD36,053.00

(不含稅)

TWD37,855.65

訂單超過 $1,300.00 免費送貨

有庫存

加上 23 件從 2026年4月27日起發貨
加上 1 件從 2026年6月18日起發貨
加上 1 件從 2026年7月10日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD36,053.00

* 參考價格

RS庫存編號:: 611-953
製造零件編號:: M210
製造商:: Rhopoint

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Rhopoint
	Product Type	Ohmmeter
	Resistance Resolution	100μΩ
	Measurement Type	4 Wire
	Battery Type	PP3
	Power Source	Battery
	Handheld	Yes
	Minimum Operating Temperature	5°C
	Maximum Operating Temperature	35°C
	Maximum Accuracy	0.1 %
	Length	80mm
	Height	150mm
	Model Number	A210-091
	Weight	510g
	Standards/Approvals	No
	Width	38mm
	Minimum Accuracy	±0.1 %

	選取全部
	品牌 Rhopoint
	Product Type Ohmmeter
	Resistance Resolution 100μΩ
	Measurement Type 4 Wire
	Battery Type PP3
	Power Source Battery
	Handheld Yes
	Minimum Operating Temperature 5°C
	Maximum Operating Temperature 35°C
	Maximum Accuracy 0.1 %
	Length 80mm
	Height 150mm
	Model Number A210-091
	Weight 510g
	Standards/Approvals No
	Width 38mm
	Minimum Accuracy ±0.1 %

豁免

COO (Country of Origin):: GB

Rhopoint Digital Milliohm Meter

The Rhopoint digital milliohm meter is a portable, low resistance digital gauge designed to measure resistance between 1mohm and 200ohm. A high degree of accuracy is achieved by utilising a 4-terminal input to eliminate errors caused by test lead length. One of the most important features of the milliohm meter is its low test current rating of about 0.005A. This ensures the contact being tested is not harmed by the test current, which can happen when higher test currents are used that may lead to erroneous measurements.

Features and Benefits

Accuracy range is ±0.1%

Auto ranging (1.999ohm, 19.99ohm and 199.9ohm)

Auto switch OFF after 3 minutes

Continuous operation for 20 hours (from standard PP3 battery)

Fully calibrated and supplied with UKAS calibration certificate

Measurement increments of 0.001ohm, 0.01ohm and 0.1ohm

Single pushbutton operation

Supplied with a set of standard test leads with spring clip connectors

Applications

Aircraft bonding check

Earth conductor continuity

Network cabling

PCB (plated through-holes)

PCB (track resistance)

Relay, switch and connector contacts

RFI shielding and coil resistance

Ring circuit testing

Transformer and motor windings

Wire-wrapped and solder joints

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007