Gossen Metrawatt PROFiTEST MF TECH EVSE-Set Multifunction Tester 600V Earth Resistance Measurement With USB

RS庫存編號:: 266-2732
Distrelec 貨號:: 303-73-736
製造零件編號:: M537D
製造商:: Gossen Metrawatt

Gossen Metrawatt PROFiTEST MF TECH EVSE-Set Multifunction Tester 600V Earth Resistance Measurement With USB

小計（1 件）*

TWD188,537.00

(不含稅)

TWD197,963.85

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年12月21日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD188,537.00

* 參考價格

RS庫存編號:: 266-2732
Distrelec 貨號:: 303-73-736
製造零件編號:: M537D
製造商:: Gossen Metrawatt

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Gossen Metrawatt
	Loop Impedance Test Type	4 Wire
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	Model Number	PROFiTEST MF TECH EVSE-Set
	RCD Ramp Test	No
	Non-Tripping	Yes
	Insulation Test Voltage	600V
	Maximum Voltage Measurement	230V
	Earth Resistance Measurement	Yes
	Downloadable Data	No
	Interface Type	USB
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Remote Switch Mode	No
	Length	330mm
	Height	90mm
	Weight	2.7kg
	Width	260mm
	Standards/Approvals	DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	IP Rating	IP40
	Test Standards	DIN VDE 0100-600, EN 61010
	Power Source	Battery
	Safety Category Voltage	300V
	Display Type	LCD
	Safety Category Level	CAT IV, CAT III
	Battery Type	Rechargeable
	Maximum Operating Temperature	40°C
	Minimum Operating Temperature	0°C

	選取全部
	品牌 Gossen Metrawatt
	Loop Impedance Test Type 4 Wire
	Product Type Multifunction Tester
	Automatic RCD Test No
	Model Number PROFiTEST MF TECH EVSE-Set
	RCD Ramp Test No
	Non-Tripping Yes
	Insulation Test Voltage 600V
	Maximum Voltage Measurement 230V
	Earth Resistance Measurement Yes
	Downloadable Data No
	Interface Type USB
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Remote Switch Mode No
	Length 330mm
	Height 90mm
	Weight 2.7kg
	Width 260mm
	Standards/Approvals DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	IP Rating IP40
	Test Standards DIN VDE 0100-600, EN 61010
	Power Source Battery
	Safety Category Voltage 300V
	Display Type LCD
	Safety Category Level CAT IV, CAT III
	Battery Type Rechargeable
	Maximum Operating Temperature 40°C
	Minimum Operating Temperature 0°C

Datasheet - Profitest MF Series

豁免

COO (Country of Origin):: DE

Gossen-Metrawatt Multifunction Tester, 600V Insulation Test Voltage, 230V Maximum Voltage Measurement - M537D

This multifunction tester is a battery-powered instrument designed to assess electrical safety and earthing in low-voltage installations. It performs insulation resistance checks up to 600 V, measures system voltage to 230 V, and evaluates earth resistance and continuity while operating within typical site temperatures. The unit is intended for use where portable verification of protective devices and wiring integrity is required and connects to a host via USB for interfacing.

Features and Benefits:

• *Made in Germany - including DAkkS calibration certificate
• 4-wire loop impedance measurement enabling accurate fault-path assessment
• 1.6 mA continuity current facilitating precise conductor checks
• Type A RCD testing that supports non-tripping assessment
• Rechargeable battery power allowing extended field operation
• IP40 protection rating for indoor site conditions

Applications

• Suitable for on-site earthing measurements in installations
• Used for insulation resistance testing on EVSE equipment
• Ideal for electricians carrying out loop impedance surveys
• Can be used for Type A RCD condition checks without tripping
• Used with calibration services requiring DAkkS certification

What safety categories does it meet for connection points?

It is rated for CAT IV and CAT III safety use with a 300 V safety-category voltage specification.

How is test data accessed from the instrument?

The unit provides a USB Interface for data transfer though it does not support downloadable stored data.

What standards underpin its test routines?

Test procedures align with DIN VDE 0100-600 and EN 61010 standards.

What are the environmental operating limits for field use?

The device operates between 0 °C and 40 °C ambient temperature.

Does it include automatic RCD ramp testing or remote switching?

It does not perform automatic RCD ramp tests and has no remote switch mode.