Phoenix Contact Contactron Motor Starter, 1 kW, 500 V ac, 3 Phase, IP20, 2.4 A

Thanks to the internal interlocking circuit and load wiring, wiring expense in reduced to a minimum. Contactron switches motors up to 4kW quickly and reliably.

Forward running
Motor protection
Emergency stop
75% less space required
75% less wiring time
10 times longer service life

By using this hybrid motor starter from Phoenix Contact, you can protect your equipment from harm caused by electrical surges. It's a 3-phase device with a reversing capability feature and current monitoring so it can run in both forward and reverse directions while also protecting against motor overload. A 500V AC operating voltage and a 2.4A output current make it a good fit for low-voltage applications.
The amount of cabling required is kept to a bare minimum thanks to the unit's internal locking circuit and load wiring. This hybrid motor starter has an IP20 (ingress protection) rating, which means it offers protection from dust and other foreign bodies over 12mm in size, so you can use it in rugged and harsh settings. As the unit has been thoroughly tested and ATEX-approved for use in hazardous environments, you can safely use it in industrial electrical installations.

• Compact dimensions of 106.6 (length) x 22.5 (width) x 113.7mm (depth) for space efficiency in small enclosures
• Potentiometer for nominal current parameterisation to ease monitoring
• DIN rail mounting is easy and tool-free, saving time and effort