STMicroelectronics L298P013TR, Brushed DC Motor Motor Driver IC, 46 V 4 A 20-Pin, PowerSO
- RS庫存編號:
- 880-5308P
- 製造零件編號:
- L298P013TR
- 製造商:
- STMicroelectronics
此圖片僅供參考,請參閲產品詳細資訊及規格
享受批量購買折扣
額外添加300件可節省TWD1,560.00
查看批量定價選項小計 150 件 (以卷裝提供)*
TWD52,500.00
(不含稅)
TWD55,125.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,060 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 節省 |
|---|---|---|
| 150 - 295 | TWD350.00 | - |
| 300 + | TWD344.80 | TWD1,560.00 |
* 參考價格
- RS庫存編號:
- 880-5308P
- 製造零件編號:
- L298P013TR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Full Bridge | |
| Maximum IGBT Collector Current | 4A | |
| Maximum Collector Emitter Voltage Vceo | 46V | |
| Mount Type | Surface | |
| Package Type | PowerSO | |
| Pin Count | 20 | |
| Output Current | 3A | |
| Maximum Supply Voltage | 46V | |
| Minimum Supply Voltage | 4.8V | |
| Minimum Operating Temperature | -25°C | |
| Typical Switching Frequency | 25kHz | |
| Maximum Operating Temperature | 130°C | |
| Standards/Approvals | No | |
| Width | 11.1mm | |
| Series | L298 | |
| Length | 16mm | |
| Height | 3.3mm | |
| Inverter Power Rating | 25W | |
| Automotive Standard | No | |
| Supply Current | 100μA | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Full Bridge | ||
Maximum IGBT Collector Current 4A | ||
Maximum Collector Emitter Voltage Vceo 46V | ||
Mount Type Surface | ||
Package Type PowerSO | ||
Pin Count 20 | ||
Output Current 3A | ||
Maximum Supply Voltage 46V | ||
Minimum Supply Voltage 4.8V | ||
Minimum Operating Temperature -25°C | ||
Typical Switching Frequency 25kHz | ||
Maximum Operating Temperature 130°C | ||
Standards/Approvals No | ||
Width 11.1mm | ||
Series L298 | ||
Length 16mm | ||
Height 3.3mm | ||
Inverter Power Rating 25W | ||
Automotive Standard No | ||
Supply Current 100μA | ||
- COO (Country of Origin):
- MY
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external Terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Features
What are Motor Driver IC's?
Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the Interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.
Motor Controllers & Drivers, STMicroelectronics
相關連結
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Amphenol Industrial Pin Contacts Screw
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V
