Infineon 6EDL7141XUMA1, Brushless Motor Driver IC, 7 V 48-Pin, PG-VQFN-48
- RS庫存編號:
- 248-6191
- 製造零件編號:
- 6EDL7141XUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 件）*
TWD113.00
(不含稅)
TWD118.65
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2027年4月01日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD113.00 |
| 10 - 99 | TWD102.00 |
| 100 - 249 | TWD92.00 |
| 250 - 499 | TWD83.00 |
| 500 + | TWD81.00 |
* 參考價格
- RS庫存編號:
- 248-6191
- 製造零件編號:
- 6EDL7141XUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | 3 Phase | |
| Maximum Collector Emitter Voltage Vceo | 7V | |
| Mount Type | Surface | |
| Package Type | PG-VQFN-48 | |
| Output Current | 1.5A | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 60V | |
| Minimum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 0.9mm | |
| Length | 7mm | |
| Standards/Approvals | RoHS | |
| Width | 7mm | |
| Series | 6EDL7141 | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration 3 Phase | ||
Maximum Collector Emitter Voltage Vceo 7V | ||
Mount Type Surface | ||
Package Type PG-VQFN-48 | ||
Output Current 1.5A | ||
Pin Count 48 | ||
Maximum Supply Voltage 60V | ||
Minimum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 0.9mm | ||
Length 7mm | ||
Standards/Approvals RoHS | ||
Width 7mm | ||
Series 6EDL7141 | ||
Automotive Standard No | ||
The Infineon 3-phase motor control gate driver IC that enables the development of high-performance battery-operated products using BLDC or PMSM motors, with an operating voltage from 5.5-60 V and configurable gate drive sink and source current up to 1.5 A, it has an adjustable gate driver supply voltage setting between 7 V, 10 V, 12 V and 15 V even at low battery voltage thanks to built-in dual charge pumps also has adjustable gate driver parameters to enable control of the slew rate to minimize system EMI.
Independently programmable high side/low side slew rate control
Independently programmable dead time for turn on/off switching
Control using 3PWM or 6PWM inputs up to 200 kHz
Built-in commutation tables for using 1PWM with or without hall sensors