Infineon, DC Motor Motor Driver IC 36-Pin, PG-DSO-36
- RS庫存編號:
- 233-4401
- 製造零件編號:
- TLE92466EDXUMA1
- 製造商:
- Infineon
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計(1 卷,共 1000 件)*
TWD357,100.00
(不含稅)
TWD374,960.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2027年5月03日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 1000 - 4000 | TWD357.10 | TWD357,100.00 |
| 5000 + | TWD346.40 | TWD346,400.00 |
* 參考價格
- RS庫存編號:
- 233-4401
- 製造零件編號:
- TLE92466EDXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | SD Card | |
| Mount Type | Surface | |
| Package Type | PG-DSO-36 | |
| Output Current | 250mA | |
| Pin Count | 36 | |
| Maximum Supply Voltage | 4V | |
| Minimum Supply Voltage | -0.3V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 28.5MHz | |
| Maximum Operating Temperature | 175°C | |
| Width | 7.6mm | |
| Series | TLE92466EDXU | |
| Height | 2.5mm | |
| Standards/Approvals | RoHS | |
| Length | 10.3mm | |
| Automotive Standard | AEC-Q101 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration SD Card | ||
Mount Type Surface | ||
Package Type PG-DSO-36 | ||
Output Current 250mA | ||
Pin Count 36 | ||
Maximum Supply Voltage 4V | ||
Minimum Supply Voltage -0.3V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 28.5MHz | ||
Maximum Operating Temperature 175°C | ||
Width 7.6mm | ||
Series TLE92466EDXU | ||
Height 2.5mm | ||
Standards/Approvals RoHS | ||
Length 10.3mm | ||
Automotive Standard AEC-Q101 | ||
The Infineon TLE92466ED is a flexible, monolithic solenoid driver IC designed for the control of linear solenoids in automatic transmissions, electronic stability control and active suspension applications. The device includes the drive transistors and the current sensing resistors to minimize the number of external components. The device controls the load current with less than 1% error. Target currents from 0 to 1500mA can be programmed with a resolution of 15 bit. The device supports dither currents up to 1800mA. The dither generator superimposes a triangular or trapezoidal waveform with programmable amplitude, frequency and shape on the programmed current set point. A 32 bit SPI interface is used to control the 6 channels and monitor the status of the diagnostic functions. The SPI communication is secured with an 8 bit CRC and a programmable timeout watchdog.
Two independent current feedback paths with fast measurement option
Integrated system clock with clock watchdog
Temperature range -40°C to 175 °C
Excellent immunity to large load supply voltage changes
