Infineon IMC101TT038XUMA1, Brushless Motor Driver IC 38-Pin, TSSOP
- RS庫存編號:
- 226-6142
- 製造零件編號:
- IMC101TT038XUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（3000 件, 每卷3000個）*
TWD292,800.00
(不含稅)
TWD307,440.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2027年4月16日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 3000 - 12000 | TWD97.60 | TWD292,800.00 |
| 15000 + | TWD94.70 | TWD284,100.00 |
* 參考價格
- RS庫存編號:
- 226-6142
- 製造零件編號:
- IMC101TT038XUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Output Current | 50mA | |
| Pin Count | 38 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 40kHz | |
| Maximum Operating Temperature | 115°C | |
| Series | IMC101TT03 | |
| Width | 6.4mm | |
| Standards/Approvals | RoHS | |
| Height | 1.1mm | |
| Length | 9.7mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Output Current 50mA | ||
Pin Count 38 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 40kHz | ||
Maximum Operating Temperature 115°C | ||
Series IMC101TT03 | ||
Width 6.4mm | ||
Standards/Approvals RoHS | ||
Height 1.1mm | ||
Length 9.7mm | ||
Automotive Standard No | ||
The Infineon IMC100 is a family of highly integrated ICs for the control of variable speed drives. By integrating both the required hardware and software to perform control of a permanent magnet synchronous motor (PMSM) they provide the shortest time to market for any motor system at the lowest system and development cost. It is flexible host interface options for motor control commands such as UART, PWM or analog input signal.
Current sensing via single or leg shunt
Sensorless operation
Optional support for hall sensors (analog or digital)
Optional boost or totem pole PFC control integrated