onsemi, Stepper Motor Driver IC 24-Pin, SSOP
- RS庫存編號:
- 189-0248
- 製造零件編號:
- NCV7750DPR2G
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 卷，共 2500 件）*
TWD117,250.00
(不含稅)
TWD123,100.00
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 2,500 個，準備發貨
單位 | 每單位 | 每卷* |
|---|---|---|
| 2500 - 10000 | TWD46.90 | TWD117,250.00 |
| 12500 + | TWD45.90 | TWD114,750.00 |
* 參考價格
- RS庫存編號:
- 189-0248
- 製造零件編號:
- NCV7750DPR2G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Output Current | 1.3A | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | -0.3V | |
| Typical Switching Frequency | 5MHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.5mm | |
| Series | NCV7750 | |
| Length | 8.65mm | |
| Standards/Approvals | Pb-Free | |
| Width | 3.9mm | |
| Inverter Power Rating | 100mW | |
| Supply Current | 3mA | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Mount Type Surface | ||
Package Type SSOP | ||
Output Current 1.3A | ||
Pin Count 24 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage -0.3V | ||
Typical Switching Frequency 5MHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.5mm | ||
Series NCV7750 | ||
Length 8.65mm | ||
Standards/Approvals Pb-Free | ||
Width 3.9mm | ||
Inverter Power Rating 100mW | ||
Supply Current 3mA | ||
Automotive Standard AEC-Q100 | ||
Power Up without Open Circuit Detection
Low Quiescent Current
16 bit SPI control
Limp Home Functionality
3.3V and 5V compatible Digital Input Supply Range
Fault Reporting of Open Load, Over Load, and Over Temperature
Power On Reset
Uniform output structure of all outputs on one side of the package.
4 Channels
600 mA Low-Side Drivers
Parallel Input Pins
Allows for power up without LED load illumination.
Able to report errors and is capable of daisy chain connections.
Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.
Suitable for both 3.3V and 5V micro processor interfaces.
The micro processor and report unusual activity for troubleshooting and system integrity purposes.
Maintains a smooth system power up and power down.
Simplifies printed circuit board layouts.
Automotive requirement maintains site and change control.
Applications
Relay Driver
LED Driver.
Stepper Motor Driver
End Products
Automotive Body Control Unit
Automotive Engine Control Unit