STMicroelectronics VNH7070ASTR, DC Motor Motor Driver IC 16-Pin, SOIC
- RS庫存編號:
- 164-7017
- 製造零件編號:
- VNH7070ASTR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 2 件）*
TWD238.00
(不含稅)
TWD249.90
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 4,784 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 624 | TWD119.00 | TWD238.00 |
| 626 - 1248 | TWD115.00 | TWD230.00 |
| 1250 + | TWD114.00 | TWD228.00 |
* 參考價格
- RS庫存編號:
- 164-7017
- 製造零件編號:
- VNH7070ASTR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Motor Type | DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Output Current | 15A | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | 4V | |
| Typical Switching Frequency | 20kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | VNH | |
| Width | 4mm | |
| Standards/Approvals | No | |
| Height | 1.25mm | |
| Length | 10mm | |
| Supply Current | 6mA | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Motor Type DC Motor | ||
Product Type Motor Driver IC | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type SOIC | ||
Output Current 15A | ||
Pin Count 16 | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage 4V | ||
Typical Switching Frequency 20kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series VNH | ||
Width 4mm | ||
Standards/Approvals No | ||
Height 1.25mm | ||
Length 10mm | ||
Supply Current 6mA | ||
Automotive Standard AEC-Q100 | ||
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® M0-7 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated lead-frames. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level.
Output current: 15 A
3 V CMOS-compatible inputs
Undervoltage shutdown
Overvoltage clamp
Thermal shutdown
Cross-conduction protection
Current and power limitation
Very low standby power consumption
Protection against loss of ground and loss of VCC