Texas Instruments L293NE, Brushed DC Motor Motor Driver IC, 36 V 1 A 16-Pin, PDIP
- RS庫存編號:
- 526-274
- 製造零件編號:
- L293NE
- 製造商:
- Texas Instruments
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 包，共 5 件）*
TWD1,169.00
(不含稅)
TWD1,227.45
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 25 件準備從其他地點送貨
- 加上 770 件從 2026年11月20日 起發貨
- 加上 350 件從 2027年1月21日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 5 + | TWD233.80 | TWD1,169.00 |
* 參考價格
- RS庫存編號:
- 526-274
- 製造零件編號:
- L293NE
- 製造商:
- Texas Instruments
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Texas Instruments | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Bipolar | |
| Maximum IGBT Collector Current | 1A | |
| Maximum Collector Emitter Voltage Vceo | 36V | |
| Mount Type | Through Hole | |
| Package Type | PDIP | |
| Output Current | 2A | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 36V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Series | L293 | |
| Length | 19.8mm | |
| Standards/Approvals | No | |
| Width | 6.35mm | |
| Height | 4.57mm | |
| Automotive Standard | No | |
| Supply Current | 6mA | |
| 選取全部 | ||
|---|---|---|
品牌 Texas Instruments | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Bipolar | ||
Maximum IGBT Collector Current 1A | ||
Maximum Collector Emitter Voltage Vceo 36V | ||
Mount Type Through Hole | ||
Package Type PDIP | ||
Output Current 2A | ||
Pin Count 16 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 36V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Series L293 | ||
Length 19.8mm | ||
Standards/Approvals No | ||
Width 6.35mm | ||
Height 4.57mm | ||
Automotive Standard No | ||
Supply Current 6mA | ||
Interface Peripheral Drivers and Actuators, Texas Instruments
The SN754410 is a quadruple high-current half-H driver designed to provide bidirectional drive currents up to 1 A at voltages from 4.5 V to 36 V. The device is designed to drive inductive loads for relays and solenoids, DC and Bipolar stepping motors Plus other high voltage and current loads in positive applications.
Relay and Inductive Load Drivers
相關連結
- Texas Instruments L293NE 36 V 1 A 16-Pin, PDIP
- Texas Instruments DRV8837DSGT WSON
- Texas Instruments DRV8838DSGR 7 V 8-Pin, WSON
- Texas Instruments PDIP
- Texas Instruments DRV8848PWP 18 V 1 A 16-Pin, HTSSOP
- Texas Instruments DRV8837DSGR 7 V 1.8 A 8-Pin, WSON
- Texas Instruments DRV8842PWP 45 V 3.5 A 28-Pin, HTSSOP
- Texas Instruments DRV8412DDW 52 V 6 A 44-Pin, HTSSOP