Microchip, Brushless DC Motor Driver 40-Pin, VQFN
- RS庫存編號:
- 352-173P
- 製造零件編號:
- ATA6847T-3333E/NHX
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計 20 件 (按連續帶提供)*
TWD1,490.00
(不含稅)
TWD1,564.40
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 3,300 件從 2026年9月07日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 20 - 198 | TWD74.50 |
| 200 - 998 | TWD69.00 |
| 1000 - 1998 | TWD63.50 |
| 2000 + | TWD52.00 |
* 參考價格
- RS庫存編號:
- 352-173P
- 製造零件編號:
- ATA6847T-3333E/NHX
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | DC Motor Driver | |
| Motor Type | Brushless | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Output Current | 2A | |
| Pin Count | 40 | |
| Maximum Supply Voltage | 42V | |
| Minimum Supply Voltage | 3V | |
| Typical Switching Frequency | 50kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 0.9mm | |
| Standards/Approvals | ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | |
| Length | 5mm | |
| Width | 5mm | |
| Supply Current | 15μA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type DC Motor Driver | ||
Motor Type Brushless | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type VQFN | ||
Output Current 2A | ||
Pin Count 40 | ||
Maximum Supply Voltage 42V | ||
Minimum Supply Voltage 3V | ||
Typical Switching Frequency 50kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 0.9mm | ||
Standards/Approvals ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | ||
Length 5mm | ||
Width 5mm | ||
Supply Current 15μA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TH
The Microchip 3 Phase Brushless Motor Gate Driver System Basis Chip (SBC) for brushless motor control, designed using advanced SOI technology. In combination with a microcontroller and six discrete power MOSFETs, the SBC forms a brushless DC motor control unit. Through six dedicated parallel inputs, the gate driver units (GDU) can be controlled independently, supporting duty cycle operations from 0% to 100%, due to the implementation of two charge pumps, for low and high-side gate drives. In addition, the circuit provides 5V and 3.3V low dropout voltage regulators, two current-sensing operational amplifiers, an integrated Back-EMF detection module and a window watchdog. The microcontroller controls the ATA6847 using an SPI interface.
Power supply voltage range from 3V to 42V
Sleep deep sleep mode with maximum 15 μA current consumption with full wake-up capability local wake-up
3.3V or 5V microcontroller interface
Up to 4 MHz SPI bus for device configuration and register access
SPI frame error detection
Dedicated NIRQ pin for MCU external interrupt to report events directly
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Amphenol Industrial Pin Contacts Screw
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter