ROHM BM6258FS-E2, Brushless DC Motor Motor Driver IC, 600 V 1.5 A 27-Pin, SSOP
- RS庫存編號:
- 264-479
- 製造零件編號:
- BM6258FS-E2
- 製造商:
- ROHM
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 組，共 5 件）*
TWD1,562.00
(不含稅)
TWD1,640.10
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每膠帶* |
|---|---|---|
| 5 - 45 | TWD312.40 | TWD1,562.00 |
| 50 - 95 | TWD296.80 | TWD1,484.00 |
| 100 + | TWD275.00 | TWD1,375.00 |
* 參考價格
- RS庫存編號:
- 264-479
- 製造零件編號:
- BM6258FS-E2
- 製造商:
- ROHM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ROHM | |
| Product Type | Motor Driver IC | |
| Motor Type | Brushless DC Motor | |
| Configuration | Bar | |
| Maximum IGBT Collector Current | 1.5A | |
| Maximum Collector Emitter Voltage Vceo | 600V | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 27 | |
| Output Current | 1.5A | |
| Minimum Supply Voltage | 13.5V | |
| Maximum Supply Voltage | 400V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 20kHz | |
| Maximum Operating Temperature | 125°C | |
| Series | BM6258FS | |
| Standards/Approvals | No | |
| Height | 2.4mm | |
| Length | 22.0mm | |
| Supply Current | 2.0mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 ROHM | ||
Product Type Motor Driver IC | ||
Motor Type Brushless DC Motor | ||
Configuration Bar | ||
Maximum IGBT Collector Current 1.5A | ||
Maximum Collector Emitter Voltage Vceo 600V | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 27 | ||
Output Current 1.5A | ||
Minimum Supply Voltage 13.5V | ||
Maximum Supply Voltage 400V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 20kHz | ||
Maximum Operating Temperature 125°C | ||
Series BM6258FS | ||
Standards/Approvals No | ||
Height 2.4mm | ||
Length 22.0mm | ||
Supply Current 2.0mA | ||
Automotive Standard No | ||
The ROHM 3-phase Brushless Fan motor driver IC adopts Presto MOS as the output transistor, and put in a small full molding package with the 180° sinusoidal commutation controller chip and the high voltage gate driver chip. The protection circuits for overcurrent, overheating, under voltage lock out and the high voltage bootstrap diode with current regulation are built-in. It provides downsizing the built-in PCB of the motor.
Output Current 1.5A
Bootstrap operation by floating high side driver including diode
180° Sinusoidal Commutation Logic
PWM Control Upper and lower arm switching
Rotational Direction Switch