Infineon 3 Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, SSOP-14, 5-Pin
- RS庫存編號:
- 258-4175
- 製造零件編號:
- TLI493DW2BWA0XTSA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD74.00
(不含稅)
TWD77.70
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 1,790 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD37.00 | TWD74.00 |
| 10 - 98 | TWD35.50 | TWD71.00 |
| 100 - 248 | TWD33.00 | TWD66.00 |
| 250 - 498 | TWD31.00 | TWD62.00 |
| 500 + | TWD28.50 | TWD57.00 |
* 參考價格
- RS庫存編號:
- 258-4175
- 製造零件編號:
- TLI493DW2BWA0XTSA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 3 | |
| Mount Type | Surface | |
| Interface Type | I2C | |
| Maximum Frequency Response | 1000kHz | |
| Minimum Frequency Response | 400kHz | |
| Minimum Supply Voltage | 2.8V | |
| Maximum Supply Voltage | 3.5V | |
| Package Type | SSOP-14 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 5 | |
| Height | 0.59mm | |
| Width | 0.93 mm | |
| Length | 1.13mm | |
| Standards/Approvals | IPC/JEDEC J-STD-020, RoHS | |
| Supply Current | 7nA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Number of Axis 3 | ||
Mount Type Surface | ||
Interface Type I2C | ||
Maximum Frequency Response 1000kHz | ||
Minimum Frequency Response 400kHz | ||
Minimum Supply Voltage 2.8V | ||
Maximum Supply Voltage 3.5V | ||
Package Type SSOP-14 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 5 | ||
Height 0.59mm | ||
Width 0.93 mm | ||
Length 1.13mm | ||
Standards/Approvals IPC/JEDEC J-STD-020, RoHS | ||
Supply Current 7nA | ||
Automotive Standard No | ||
The Infineon XENSIV is the device for industrial and consumer applications, the low power 3D hall sensor with I2C interface. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options. Due to the small WLB-5 package and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions.
Power down mode with 7 nA (typ.) power consumption
Variable update frequencies and power modes
Triggering by external microcontroller possible via I2C protocol
X-Y angular measurement mode
Interrupt signal to indicate a valid measurement to the microcontroller
Pb-free (RoHS compliant) and halogen free package
相關連結
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V SSOP-14, 5-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 24 V TSOP, 6-Pin
- Infineon Through Hole Hall Effect Sensor 2.8 V 3.5 V SSO, 3-Pin
- Infineon Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- STMicroelectronics 3-Axis Surface Hall Effect Sensor 1.71 V 3.6 V LGA, 12-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.71 V 5.5 V DFN-8
- ams OSRAM 1-Axis Surface Hall Effect Sensor 3.3 V 5 V PWM 16-Pin