Melexis 3-Axis Surface Position Sensor 4.5 V 5.5 V, SPI, SOIC, 8-Pin
- RS庫存編號:
- 237-7650
- 製造零件編號:
- MLX90316KDC-BDG-100-RE
- 製造商:
- Melexis
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD166.00
(不含稅)
TWD174.30
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 153 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD166.00 |
| 10 - 99 | TWD164.00 |
| 100 - 499 | TWD161.00 |
| 500 - 999 | TWD158.00 |
| 1000 + | TWD154.00 |
* 參考價格
- RS庫存編號:
- 237-7650
- 製造零件編號:
- MLX90316KDC-BDG-100-RE
- 製造商:
- Melexis
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Melexis | |
| Product Type | Position Sensor | |
| Sensor Type | Position Sensor | |
| Number of Axis | 3 | |
| Technology | Hall Effect | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Magnetic Type | Monolithic | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOIC | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Length | 4.8mm | |
| Height | 1.52mm | |
| Series | MLX90316 | |
| Width | 3.81 mm | |
| Standards/Approvals | RoHS | |
| Supply Current | 13.5mA | |
| Response Time | 400μs | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Melexis | ||
Product Type Position Sensor | ||
Sensor Type Position Sensor | ||
Number of Axis 3 | ||
Technology Hall Effect | ||
Mount Type Surface | ||
Interface Type SPI | ||
Magnetic Type Monolithic | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOIC | ||
Minimum Operating Temperature -40°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Length 4.8mm | ||
Height 1.52mm | ||
Series MLX90316 | ||
Width 3.81 mm | ||
Standards/Approvals RoHS | ||
Supply Current 13.5mA | ||
Response Time 400μs | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The Melexis position sensor IC providing the absolute angular position of a small dipole magnet rotating above the device surface. This monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density. This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air gap, off-axis) tolerances. The output transfer characteristic is fully programmable to match any specific requirement through end-of-line calibration. The Melexis programming unit PTC-04 communicates and calibrates the device exclusively through the connector terminals.
Absolute rotary position sensor IC
Simple & robust magnetic design
Programmable angular range up to 360 degrees
Programmable linear transfer characteristic
Selectable analog (ratio metric), PWM, serial protocol
10 bit angular thermal accuracy
40 bit ID number
Single die – SOIC-8 package RoHS compliant
相關連結
- Melexis 3-Axis Surface Position Sensor 4.5 V 5.5 V SOIC, 8-Pin
- Melexis Surface Position Sensor 4.5 V 5.5 V PWM SOIC, 8-Pin
- Melexis 3-Axis Surface Position Sensor 4.5 V 5.5 V SOIC, 8-Pin
- Melexis 3-Axis Surface Hall Effect Sensor 2.2 V 3.6 V QFN, 16-Pin
- ams OSRAM 1-Axis Surface Position Sensor 3 V 5.5 V SPI 14-Pin
- Infineon 1-Axis Surface Position Sensor 4.5 V 5.5 V PG-TDSO-8-1, 8-Pin
- Infineon 2-Axis Surface Inclinometer 3 V 5.5 V DSO, 8-Pin
- Infineon 3-Axis PCB Sensor 2.8 V 5.5 V PG-VSON-8, 8-Pin