Infineon Surface Hall Effect Sensor 4.5 V 5.5 V, SPC, TDSO, 8-Pin
- RS庫存編號:
- 236-3687
- 製造零件編號:
- TLE4999C8XUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 卷，共 2500 件）*
TWD249,000.00
(不含稅)
TWD261,450.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月30日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 2500 - 2500 | TWD99.60 | TWD249,000.00 |
| 5000 + | TWD97.60 | TWD244,000.00 |
* 參考價格
- RS庫存編號:
- 236-3687
- 製造零件編號:
- TLE4999C8XUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPC | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | TDSO | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 8 | |
| Series | TLE4999 | |
| Width | 4.02 mm | |
| Length | 5.17mm | |
| Standards/Approvals | No | |
| Height | 1.2mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPC | ||
Minimum Supply Voltage 4.5V | ||
Package Type TDSO | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 8 | ||
Series TLE4999 | ||
Width 4.02 mm | ||
Length 5.17mm | ||
Standards/Approvals No | ||
Height 1.2mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
The Infineon XENSIV is a dual channel linear hall sensor with a bus-capable digital SPC interface. Both channels are integrated on one die in the chip. The highly accurate measurement channels can be used for a plausibility check on system level. This enables a high diagnostic coverage.
Operating automotive temperature range -40°C to 125°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
Frameholder mechanism
相關連結
- Infineon Surface Hall Effect Sensor 4.5 V 5.5 V TDSO, 8-Pin
- Infineon Surface Hall Effect Sensor 4.5 V 5.5 V TDSO, 8-Pin
- Infineon Surface Hall Effect Sensor Latch 4.5 V 5.5 V 3-Pin
- Infineon SMD/SMT Hall Effect Sensor 4.5-5.5 V
- ams OSRAM Surface Hall Effect Sensor 4.5 V 5.5 V TSSOP, 20-Pin
- Broadcom Surface Hall Effect Sensor 4.5 V 5.5 V 8-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- ams OSRAM Surface Hall Effect Sensor 4.5 V 5.5 V SOIC, 8-Pin