Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5V, IC, TO-92, 3-Pin
- RS庫存編號:
- 236-2760
- 製造零件編號:
- SS49E
- 製造商:
- Honeywell
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 袋，共 1000 件）*
TWD169,900.00
(不含稅)
TWD178,400.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 1,000 件從 2026年9月28日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每袋* |
|---|---|---|
| 1000 - 4000 | TWD169.90 | TWD169,900.00 |
| 5000 + | TWD164.80 | TWD164,800.00 |
* 參考價格
- RS庫存編號:
- 236-2760
- 製造零件編號:
- SS49E
- 製造商:
- Honeywell
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Honeywell | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Technology | Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Linear | |
| Interface Type | IC | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 6.5V | |
| Package Type | TO-92 | |
| Sensitivity | 25% | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 100°C | |
| Height | 1.7mm | |
| Standards/Approvals | No | |
| Width | 3mm | |
| Series | SS49E | |
| Length | 4.06mm | |
| Supply Current | 6mA | |
| Response Time | 3s | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Honeywell | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Technology Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Linear | ||
Interface Type IC | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 6.5V | ||
Package Type TO-92 | ||
Sensitivity 25% | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 100°C | ||
Height 1.7mm | ||
Standards/Approvals No | ||
Width 3mm | ||
Series SS49E | ||
Length 4.06mm | ||
Supply Current 6mA | ||
Response Time 3s | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
Honeywell SS49E Series Hall Effect Sensor, 2.7V Minimum Supply Voltage, 6.5V Maximum Supply Voltage - SS49E
This Hall effect sensor is a three-pin linear magnetic IC supplied in a TO-92 through-hole package, designed to convert magnetic field variations into an electrical signal for electronic and automation systems. It operates across a modest supply range and is intended for incorporation into circuit designs where compact, interface-ready sensing is required.
Features and Benefits:
• Operates from 2.7V to 6.5V enabling flexible power arrangements • Low supply current of 6 mA minimises system power draw • Linear output response time of 3 s supports steady-state measurements • Sensitive to magnetic field changes with 25% sensitivity for responsive detection • Wide ambient range from -40 °C to 100 °C suits varied environmental conditions
Applications
• Suitable for position sensing in linear actuators and slides • Ideal for current sensing in power-control circuits • Used with motion-detection systems in factory automation • Can be used for proximity detection in mechanical assemblies
What mounting method is required for integration into a prototype board?
It uses a through-hole mounting style compatible with standard drilled boards and hand-solder assembly, simplifying mechanical securing and connection.
How Compact is the component for dense board layouts?
The package footprint is small with a body width of around 3mm and length close to 4.06mm, allowing placement in tight spaces between other components.
What Interface type does it present to system electronics?
The device is an IC-type Interface requiring three electrical connections for supply, ground and output, which suits straightforward analogue or digital conditioning stages.
What technology underpins the sensing mechanism?
It employs Hall-effect technology to produce an electrical signal proportional to the applied magnetic field, enabling linear magnetic field measurements.
相關連結
- Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5V 3-Pin
- Honeywell Surface Hall Effect Sensor 2.7 V 6.5V 3-Pin
- Honeywell Through Hole Bipolar Hall Effect Digital Position Sensor 2.7 V 7V TO-92, 3-Pin
- Honeywell Through Hole Hall Effect Sensor 4.5 V 24V TO-92, 3-Pin
- Honeywell Surface Hall Effect Sensor 4.5 V 10.5V 3-Pin
- Honeywell Through Hole Hall Effect Sensor 4.5 V 10.5V 3-Pin
- Honeywell Through Hole Hall Effect Sensor 3.8 V 30V TO-92, 3-Pin
- Honeywell Through Hole Hall Effect Sensor 3 V 24V TO-92, 3-Pin