Honeywell Technologies Surface Hall Effect Sensor 4.5 V 10.5V, TO-92, 3-Pin

This hall effect sensor converts magnetic field variations into a linear electrical output for measurement and control tasks. It operates from a single supply within the stated voltage range and is supplied in a Compact through‑hole package suitable for surface‑mounted applications. The device targets designs where low current draw and Rapid detection are required across a wide operating temperature span.

• 5mV/g sensitivity enables precise magnetic-to-voltage conversion
• 7mA supply current minimises power consumption in battery systems
• 4.1μs response time allows quick detection of magnetic changes
• -40°C to 150°C temperature range supports harsh environments
• Linear magnetic output simplifies proportional measurement tasks

• Suitable for position sensing in industrial actuators
• Ideal for speed detection in rotary encoders
• Used for contactless current sensing in power modules
• Can be used for proximity detection in automation systems
• Useful in handheld instruments requiring low current operation

It operates from 4.5V up to a maximum of 10.5V.

It requires three pins for supply, ground and analogue output.

The device is supplied for surface mounting and comes in a TO-92 package.

The component has a width of 3mm and a height of 1.7mm for Compact layouts.

It is provided without automotive-specific approvals but can serve as an alternative where such certification is not mandatory.