- RS庫存編號:
- 194-2930
- 製造零件編號:
- MLX90316KDC-BCG-000-RE
- 製造商:
- Melexis
8878 現貨庫存,可於6工作日發貨。
已增加
單價(不含稅) 個 (每包:2個)
TWD183.00
(不含稅)
TWD192.15
(含稅)
單位 | Per unit | Per Pack* |
2 - 748 | TWD183.00 | TWD366.00 |
750 - 1498 | TWD178.50 | TWD357.00 |
1500 + | TWD176.00 | TWD352.00 |
* 參考價格 |
- RS庫存編號:
- 194-2930
- 製造零件編號:
- MLX90316KDC-BCG-000-RE
- 製造商:
- Melexis
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
The MLX90316 is a Triaxis® rotary position sensor IC providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an IMC on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density.
This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.
This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.