STMicroelectronics 3 Axis Surface Sensor 1.71 V 3.6V, Serial-I2C, Serial-SPI, LGA, 14-Pin
- RS庫存編號:
- 162-3641P
- 製造零件編號:
- ISM330DLCTR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們不知道此物品是否會到貨，因為製造商正在對其逐步停產。
- RS庫存編號:
- 162-3641P
- 製造零件編號:
- ISM330DLCTR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Sensor Type | Accelerometer, Gyroscope | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Digital, Analogue | |
| Mount Type | Surface | |
| Interface Type | Serial-I2C, Serial-SPI | |
| Maximum Frequency Response | 400kHz | |
| Minimum Frequency Response | 0kHz | |
| Minimum Supply Voltage | 1.71V | |
| Package Type | LGA | |
| Maximum Supply Voltage | 3.6V | |
| Sensitivity | 0.49mg/LSB | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 14 | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.83mm | |
| Width | 3mm | |
| Standards/Approvals | No | |
| Length | 2.5mm | |
| Series | ISM330DLC | |
| Automotive Standard | No | |
| Supply Current | 750μA | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Sensor Type Accelerometer, Gyroscope | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Digital, Analogue | ||
Mount Type Surface | ||
Interface Type Serial-I2C, Serial-SPI | ||
Maximum Frequency Response 400kHz | ||
Minimum Frequency Response 0kHz | ||
Minimum Supply Voltage 1.71V | ||
Package Type LGA | ||
Maximum Supply Voltage 3.6V | ||
Sensitivity 0.49mg/LSB | ||
Minimum Operating Temperature -40°C | ||
Pin Count 14 | ||
Maximum Operating Temperature 85°C | ||
Height 0.83mm | ||
Width 3mm | ||
Standards/Approvals No | ||
Length 2.5mm | ||
Series ISM330DLC | ||
Automotive Standard No | ||
Supply Current 750μA | ||
The ISM330DLC is a system-in-package featuring a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0 applications.ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes.The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element.
3D accelerometer with selectable full scale
3D gyroscope with selectable full scale
Dedicated gyroscope output chain with low latency, low noise and dedicated low-pass filters
Embedded hard, soft ironing for external magnetic sensor corrections
Embedded temperature sensor
High shock survivability
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Amphenol Industrial Pin Contacts Screw
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V