DiodesZetex Surface Hall Effect Sensor 3 V 28 V, SIP, 3-Pin
- RS庫存編號:
- 146-4785
- 製造零件編號:
- AH3391Q-P-B
- 製造商:
- DiodesZetex
可享批量折扣
小計（1 包，共 10 件）*
TWD174.00
(不含稅)
TWD182.70
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 730 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 240 | TWD17.40 | TWD174.00 |
| 250 - 490 | TWD16.90 | TWD169.00 |
| 500 + | TWD16.50 | TWD165.00 |
* 參考價格
- RS庫存編號:
- 146-4785
- 製造零件編號:
- AH3391Q-P-B
- 製造商:
- DiodesZetex
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | DiodesZetex | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 28V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Height | 1.6mm | |
| Width | 3.2 mm | |
| Series | AH3391Q | |
| Standards/Approvals | RoHS | |
| Length | 4.3mm | |
| Supply Current | 4mA | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 3.75μs | |
| 選取全部 | ||
|---|---|---|
品牌 DiodesZetex | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 28V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Height 1.6mm | ||
Width 3.2 mm | ||
Series AH3391Q | ||
Standards/Approvals RoHS | ||
Length 4.3mm | ||
Supply Current 4mA | ||
Automotive Standard AEC-Q100 | ||
Response Time 3.75μs | ||
Hall Effect Sensors, Diodes Inc
A range of linear output Hall Effect sensor ICs, designed for position and proximity sensing from Diodes Inc.
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
相關連結
- DiodesZetex Surface Hall Effect Sensor 3 V 28 V 3-Pin
- DiodesZetex Surface Hall Effect Sensor 3 V 28V 3-Pin
- DiodesZetex Through Hole Hall Effect Sensor 3 V 28 V 3-Pin
- DiodesZetex Through Hole Hall Effect Sensor 2.7 V 27 V 3-Pin
- DiodesZetex Through Hole Micropower Omnipolar Hall-Effect Sensor Switch 2.5 V 5.5 V 3-Pin
- DiodesZetex Through Hole Hall Effect Latch Sensor 3.5 V 20 V 3-Pin
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Omnipolar Solder Terminal Open Drain Maintained -40 °C 3 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained -40 °C 3 V