規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	onsemi
	Logic Family	ECL
	Logic Function	Divider
	Number of Elements per Chip	2
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	8
	Dimensions	5 x 4 x 1.5mm
	Height	1.5mm
	Length	5mm
	Width	4mm
	Maximum Operating Supply Voltage	5.7 V
	Minimum Operating Temperature	-40 °C
	Maximum Operating Temperature	+85 °C
	Minimum Operating Supply Voltage	4.2 V

	選取全部
	品牌 onsemi
	Logic Family ECL
	Logic Function Divider
	Number of Elements per Chip 2
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 8
	Dimensions 5 x 4 x 1.5mm
	Height 1.5mm
	Length 5mm
	Width 4mm
	Maximum Operating Supply Voltage 5.7 V
	Minimum Operating Temperature -40 °C
	Maximum Operating Temperature +85 °C
	Minimum Operating Supply Voltage 4.2 V

Datasheet MC100EL32DG

The MC10EL/100EL32 is an integrated divide by 2 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. If used, the VBB output should be bypassed to ground with a 0.01 F capacitor. Also note that the VBB is designed to be used as an input bias on the EL32 only, the VBB output has limited current sink and source capability. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random state, the reset allows for the synchronization of multiple EL32's in a system. The 100 Series contains temperature compensation.

510ps Propagation Delay
3.0GHz Toggle Frequency
ESD Protection: > 1 KV HBM, > 100 V MM
PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE= 0 V
NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V
Internal Input Pulldown Resistors on CLK(s) and R.
Moisture Sensitivity Level 1
Transistor Count = 82 devices
Applications
Phase Lock Loops

onsemi MC100EL32DG, Dual Monostable Multivibrator, Divider, 8-Pin SOIC

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

相關連結