Carlo Gavazzi Monitoring Relay, 1 Phase, 1 NO/1 NC, 0.1mA to 10A, 24 to 48 V ac, 115V
- RS庫存編號:
- 256-5058
- 製造零件編號:
- DIB01CD4810A
- 製造商:
- Carlo Gavazzi
小計（1 件）*
TWD5,500.00
(不含稅)
TWD5,775.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 3 件從 2026年8月13日 起裝運發貨
- 加上 5 件從 2026年9月24日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD5,500.00 |
* 參考價格
- RS庫存編號:
- 256-5058
- 製造零件編號:
- DIB01CD4810A
- 製造商:
- Carlo Gavazzi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Carlo Gavazzi | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | 1 NO/1 NC | |
| Minimum Current Sensed | 0.1mA | |
| Power Consumption | 4VA | |
| Maximum Current Sensed | 10A | |
| Terminal Type | Screw | |
| Time Delay | 0.1 to 30 s | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | -20°C | |
| Supply AC Voltage | 115V | |
| Supply DC Voltage | 24 to 48 V ac | |
| Maximum Operating Temperature | 60°C | |
| Height | 99.5mm | |
| Width | 80mm | |
| Standards/Approvals | CSA, UL, CE marking | |
| Length | 22.5mm | |
| 選取全部 | ||
|---|---|---|
品牌 Carlo Gavazzi | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration 1 NO/1 NC | ||
Minimum Current Sensed 0.1mA | ||
Power Consumption 4VA | ||
Maximum Current Sensed 10A | ||
Terminal Type Screw | ||
Time Delay 0.1 to 30 s | ||
IP Rating IP20 | ||
Minimum Operating Temperature -20°C | ||
Supply AC Voltage 115V | ||
Supply DC Voltage 24 to 48 V ac | ||
Maximum Operating Temperature 60°C | ||
Height 99.5mm | ||
Width 80mm | ||
Standards/Approvals CSA, UL, CE marking | ||
Length 22.5mm | ||
- COO (Country of Origin):
- IT
The Carlo Gavazzi DIB01 is a precise TRMS AC/DC over or under current monitoring relays. Direct measuring or through current transformer. Owing to the built-in latch function, the ON-position of the relay output can be maintained. Inhibit function can be used to avoid relay operation when not desired. The LED's indicate the state of the alarm and the output relay. Through the built-in shunt it is possible to monitor loads up to 10 A AC/DC.
Selection of measuring range by DIP-switches
Measuring ranges from 0.1 mA to 10 A AC/DC
Adjustable current on relative scale
Adjustable hysteresis on relative scale
Adjustable delay function (0.1 to 30 s)
相關連結
- Carlo Gavazzi Monitoring Relay SPDT 0.1mA to 5A 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 0.5A to 5A 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 10mA to 500mA 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 24 V 48 V dc
- Carlo Gavazzi Monitoring Relay SPDT 48 V ac 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 115V ac, 230 V ac 48 V ac
- Carlo Gavazzi Monitoring Relay DIN Rail 40 V dc