RS PRO Microwave Ceiling Microwave Detector

RS庫存編號:: 796-2071
製造商:: RS PRO

RS PRO Microwave Ceiling Microwave Detector

小計（1 件）*

TWD18,275.00

(不含稅)

TWD19,188.75

訂單超過 $1,300.00 免費送貨

有庫存

7 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD18,275.00

* 參考價格

RS庫存編號:: 796-2071
製造商:: RS PRO

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	RS PRO
	Radiation Type	Microwave
	Product Type	Ceiling Microwave Detector
	Power Source	Mains
	Minimum Operating Temperature	-10°C
	Maximum Frequency	50Hz
	Height	86mm
	Length	86mm
	Weight	100g
	Maximum Operating Temperature	35°C
	Width	45.5 mm
	Standards/Approvals	No

	選取全部
	品牌 RS PRO
	Radiation Type Microwave
	Product Type Ceiling Microwave Detector
	Power Source Mains
	Minimum Operating Temperature -10°C
	Maximum Frequency 50Hz
	Height 86mm
	Length 86mm
	Weight 100g
	Maximum Operating Temperature 35°C
	Width 45.5 mm
	Standards/Approvals No

COO (Country of Origin):: GB

Ceiling Mounted Microwave Presence Detector

This series of microwave presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. The switch detects movement using a highly sensitive microwave detector. This works by emitting low power microwave signals and measuring the reflections as the signals bounce of moving objects. The microwave presence detector is optimised for ceiling mounting applications to give detection over long distances.

When movement is detected the load is turned on. When an area is no longer occupied the load will switch off after an adjustable time out period.

The internal light sensor provides additional energy saving in lighting applications. When an area is occupied lighting is only switched on when the level of natural light is below a preset level.

The /IP variant of these products is sealed to IP66

Microwave Sensor detects movement

Receives commands from an IR handset

Light level sensor measures light level

Presence detection

Occupancy Lighting Controllers

Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.

RS PRO Microwave Ceiling Microwave Detector

訂單超過 $1,300.00 免費送貨

Ceiling Mounted Microwave Presence Detector

Occupancy Lighting Controllers

相關連結