3M 501E Beige Masking Tape 24mm x 50 m

This masking tape is a crepe paper-based adhesive product designed for temporary surface protection and precise masking during thermal processes. It is intended for use where controlled adhesion and clean removal are required in manufacturing, painting and heat-exposed operations.

• Withstands continuous heat up to160°C for high-temperature tasks
• Rubber-based adhesive provides consistent tack for secure placement
• Thin0.15mm construction allows precise edge definition for paint lines
• Tensile strength4.34N/cm resists elongation during handling and masking-off
• Beige colour offers clear Visual contrast against most substrates

• Suitable for masking during enamelling and baking cycles
• Ideal for painter’s tasks requiring Sharp edges and fine detail
• Used for component protection in electrical assembly processes
• Can be used for temporary holds in mechanical fabrication and automation setups
• Used with panel painting in automotive finishing and trim work

The material remains dimensionally stable and maintains adhesive contact at temperatures up to160°C, reducing lift or edge creep in brief thermal cycles.

Removal typically leaves minimal residue due to the rubber adhesive formulation, enabling clean masking-off after paint or enamel cure when removed within appropriate timeframes.

The crepe paper backing provides slight stretch and conforms to irregular profiles, improving adhesion on curved or textured surfaces without tearing easily.

Its24mm width combined with0.15mm thickness supports fine line control for narrow-edge masking in detailed painting tasks.