Digitron 2000P Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 7 bar

查看所有Manometers

小計（1 件）*

TWD16,911.00

(不含稅)

TWD17,756.55

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 30 件從 2026年4月30日 起裝運發貨
  • 加上 13 件從 2026年5月14日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD16,911.00

* 參考價格

RS庫存編號:
313-0233
製造零件編號:
2023P7-7BAR
製造商:
Digitron
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Digitron

Product Type

Manometer

Accuracy

±0.15% + 0.0105 bar + 1 Digit

Number of Pressure Ports

2

Maximum Pressure Measurement

7bar

Minimum Pressure Measurement

0bar

Pressure Port Type

Differential

Leak Testing

Yes

Minimum/Maximum Recordings

Yes

Model Number

2000P

IP Rating

IP67

Battery Type

AA

Minimum Operating Temperature

-10°C

Maximum Overpressure

10bar

Maximum Operating Temperature

50°C

Display Type

LCD

Battery Life

200h

Standards/Approvals

No

Length

155mm

Height

40mm

Hazardous Area Certification

NO

Weight

180g

豁免

COO (Country of Origin):
GB

Digitron 2023P, 0-7 bar, Differential Manometer


The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels.

Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)

2 inputs via 1/8 BSP (4mm id, 6mm od hose)

Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSI

Min/Max recorder and range lock

Dimensions 155 x 67 x 40 mm

Weight 180g

Digitron 2000P Series - Manometers


Hand-held manometers series. Features found in the range include:

Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment

Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere)

Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose)

Zeroing absolute user input of local barometric conditions for additional accuracy

Preset engineering units - mbar, Pa, inH²O, mH²O, inHg, mHg, kPa, PSI

Min/Max & Average recording, range lock & selectable auto off

Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels

Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory

Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225)

Dimensions: 155 x 67 x 40mm, weight 180g

All instruments are supplied with instruction manual.

Model 202xP and 208xP additional features:


7 pre-set engineering units

Range lock, Min / Max recorder

Smoothing

Model 208xP additional features:


Automatic leak testing

250 memory logging on demand or at preset intervals

Min/Max and averaging recorder

4 digit reference coding of logged data

Cal function zero

Infra red serial interface to connect via DigiLink interface direct to a serial printer or PC

User-definable scaling

Note

1. Requires 2xAA batteries (please see 744-2199 ).
2. Particular care should be taken not to over pressure this device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
3. The differential / gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
4. Not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon. To use these instruments with these fluid components, isolation must be provided in the form of a buffer, such as mineral oil or dry air.

Supplied with

Instruction manual

相關連結