Lenze Locking Bush ETP EXPRESS 15MM, 18mm Shaft Diameter
- RS庫存編號:
- 477-6789
- 製造零件編號:
- ETP EXPRESS 15MM
- 製造商:
- Lenze
6 現貨庫存,可於6工作日發貨。
單價(不含稅) 個
TWD8,853.00
(不含稅)
TWD9,295.65
(含稅)
單位 | 每單位 |
---|---|
1 - 5 | TWD8,853.00 |
6 + | TWD8,651.00 |
- RS庫存編號:
- 477-6789
- 製造零件編號:
- ETP EXPRESS 15MM
- 製造商:
- Lenze
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- SE
產品詳細資訊
ETP Express Locking Bushes
Unique single screw hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for ultra-fast mounting of gears, pulleys, sprockets etc where frequent operations and very high accuracy are required.
Very high concentricity and self-centering
Ultra-fast, locking and un-locking with single pressure screw
Radial pressure screw for easy access
Automatic release when screw is loosened
Ideal for applications with very small diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.03mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Ultra-fast, locking and un-locking with single pressure screw
Radial pressure screw for easy access
Automatic release when screw is loosened
Ideal for applications with very small diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.03mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.5, Cast Iron x 2.0, Aluminium x 2.5. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
規格
屬性 | 值 |
---|---|
Shaft Diameter | 18mm |
Outside Diameter | 15mm |
Locking Bush Type | Locking Bush |
Flange Diameter | 46mm |
Length | 39mm |
Rated Torque | 46Nm |
Material | Steel |
Minimum Operating Temperature | -30°C |
Maximum Operating Temperature | +85°C |
Series | ETP EXPRESS |