Ewellix Makers in Motion LBBR 3-C004 Bearing with 3 mm ID 7 mm OD 60 N 44 N
- RS庫存編號:
- 390-6147
- 製造零件編號:
- LBBR 3-C004
- 製造商:
- Ewellix Makers in Motion
可享批量折扣
小計（1 袋，共 4 件）*
TWD5,247.00
(不含稅)
TWD5,509.35
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
袋 | 每袋 | 每單位* |
|---|---|---|
| 1 - 5 | TWD5,247.00 | TWD1,311.75 |
| 6 - 11 | TWD5,036.00 | TWD1,259.00 |
| 12 + | TWD4,828.00 | TWD1,207.00 |
* 參考價格
- RS庫存編號:
- 390-6147
- 製造零件編號:
- LBBR 3-C004
- 製造商:
- Ewellix Makers in Motion
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 7 mm | |
| Length | 10mm | |
| Inside Diameter | 3 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 60N | |
| Static Load Rating | 44N | |
| Base to Bore Centerline | 3.5mm | |
| Closure Type | Closed | |
| Material | Steel | |
| Series | LBBR | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 7 mm | ||
Length 10mm | ||
Inside Diameter 3 mm | ||
End Type Shielded | ||
Dynamic Load Rating 60N | ||
Static Load Rating 44N | ||
Base to Bore Centerline 3.5mm | ||
Closure Type Closed | ||
Material Steel | ||
Series LBBR | ||
Standards/Approvals No | ||
不適用
- COO (Country of Origin):
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
相關連結
- Ewellix Makers in Motion LBBR 4-C004 Bearing with 4 mm ID 8 mm OD 75 N 60 N
- Ewellix Makers in Motion LBBR 5-C004 Bearing with 5 mm ID 10 mm OD 170 N 129 N
- Ewellix Makers in Motion LBBR 16 Bearing with 16 mm ID 24 mm OD 930 N 630 N
- Ewellix Makers in Motion LBBR 14 Bearing with 14 mm ID 21 mm OD 710 N 530 N
- Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBBR 10 Bearing with 10 mm ID 17 mm OD 585 N 415 N
- Ewellix Makers in Motion LBBR 25 Bearing with 25 mm ID 35 mm OD 2120 N 1560 N
- Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N