INA KBS25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- RS庫存編號:
- 172-1235
- 製造零件編號:
- KBS25-PP-AS
- 製造商:
- INA
可享批量折扣
查看批量定價選項小計（1 件）*
TWD3,115.00
(不含稅)
TWD3,270.75
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年12月14日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD3,115.00 |
| 5 + | TWD3,022.00 |
* 參考價格
- RS庫存編號:
- 172-1235
- 製造零件編號:
- KBS25-PP-AS
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Bearing | |
| Length | 58mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 2950N | |
| Closure Type | Closed | |
| Static Load Rating | 2850N | |
| Base to Bore Centerline | 20mm | |
| Series | KBS | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Bearing | ||
Length 58mm | ||
End Type Sealed | ||
Dynamic Load Rating 2950N | ||
Closure Type Closed | ||
Static Load Rating 2850N | ||
Base to Bore Centerline 20mm | ||
Series KBS | ||
Standards/Approvals No | ||
Schaeffler KBS Series Bearing, 25mm Inside Diameter, 40mm Outside Diameter - KBS25-PP-AS
This bearing is a sealed rotary component designed to support radial loads in Compact assemblies. It features a sealed end type closure to limit contamination ingress and is suited to applications where a low profile, enclosed unit is required. The product is intended for use within machinery that demands contained lubrication and consistent rotational support.
Features and Benefits:
• Dynamic capacity 2950N delivering sustained operational load handling
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
Applications
• Suitable for rotary shafts in Compact industrial gearboxes
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
What internal shaft size will the component accept?
It accepts shafts that match a 25mm inside diameter.
How does the unit perform under sudden load increases?
It offers a static load capacity of 2850N to withstand short-term Peak loads.
What outer envelope must be allowed in housing design?
The unit requires a 40mm outside diameter clearance for correct installation.
How much axial length should a designer allocate along the shaft?
Allocate 58mm of axial space to accommodate the full bearing length.
相關連結
- INA KB25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KB25-PP Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBO25-PP-AS Bearing with 25 mm ID 40 mm OD 2850 N 2300 N
- INA KB25 Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBO30-PP-AS Bearing with 30 mm ID 47 mm OD 3700 N 3000 N
- INA KBS16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KBO40-PP-AS Bearing with 40 mm ID 62 mm OD 6100 N 4600 N
- INA KBO50-PP-AS Bearing with 50 mm ID 75 mm OD 8900 N 6600 N