可享批量折扣
查看批量定價選項小計（1 件）*
TWD2,141.00
(不含稅)
TWD2,248.05
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 4 件從 2026年11月02日 起發貨
- 加上 2 件從 2026年11月24日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD2,141.00 |
| 5 - 9 | TWD2,077.00 |
| 10 + | TWD2,013.00 |
* 參考價格
- RS庫存編號:
- 172-1233
- 製造零件編號:
- KBS16-PP-AS
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Bearing | |
| Outside Diameter | 26mm | |
| Length | 36mm | |
| Inside Diameter | 16mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 840N | |
| Static Load Rating | 780N | |
| Base to Bore Centerline | 13mm | |
| Closure Type | Closed | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Bearing | ||
Outside Diameter 26mm | ||
Length 36mm | ||
Inside Diameter 16mm | ||
End Type Sealed | ||
Dynamic Load Rating 840N | ||
Static Load Rating 780N | ||
Base to Bore Centerline 13mm | ||
Closure Type Closed | ||
Standards/Approvals No | ||
Schaeffler Bearing, 16mm Inside Diameter, 26mm Outside Diameter - KBS16-PP-AS
This bearing is a sealed rotary component intended to support radial loads in Compact assemblies. It provides a protected rolling Interface for shafts in confined spaces, offering a combination of load capacity and sealed construction suitable for environments where contamination control and consistent rotational support are required.
Features and Benefits:
• 840N dynamic load capacity for sustained rotational forces
• 780N static load capacity for high standstill loads
• Sealed end type to restrict ingress and contamination
• 13mm base to bore centreline for precise mounting alignment
• 36mm overall length for constrained axial accommodation
• 780N static load capacity for high standstill loads
• Sealed end type to restrict ingress and contamination
• 13mm base to bore centreline for precise mounting alignment
• 36mm overall length for constrained axial accommodation
Applications
• Suitable for Compact drive assemblies in light vehicles
• Ideal for small gearbox input or output shafts
• Used with electric motor shaft supports in confined spaces
• Can be used for pulley or idler wheel rotational support
• Suitable for industrial equipment requiring contamination control
• Ideal for small gearbox input or output shafts
• Used with electric motor shaft supports in confined spaces
• Can be used for pulley or idler wheel rotational support
• Suitable for industrial equipment requiring contamination control
What mounting datum should I reference for alignment?
Use the 13mm base to bore centreline as the primary datum for siting and alignment.
How does the sealed construction affect maintenance intervals?
The sealed configuration reduces contaminant ingress, thereby extending lubrication life and lowering inspection frequency compared with unsealed units.
What load types is this unit primarily designed to handle?
It is designed mainly for radial loads, with the specified dynamic and static capacities guiding selection.
Which dimensional measurements define compatibility with shafts and housings?
Match the 16mm inside diameter for shaft fit and the 26mm outside diameter for housing-bore compatibility.
相關連結
- INA KB16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16-PP Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16 Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16-P Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KBO16-PP-AS Bearing with 16 mm ID 26 mm OD 800 N 620 N
- INA KBO30-PP-AS Bearing with 30 mm ID 47 mm OD 3700 N 3000 N
- INA KBO25-PP-AS Bearing with 25 mm ID 40 mm OD 2850 N 2300 N
- INA KBO40-PP-AS Bearing with 40 mm ID 62 mm OD 6100 N 4600 N