RS PRO Surface Mounted Air Switch Air Switch

享受批量購買折扣

額外添加12件可節省TWD588.00

查看批量定價選項

小計(1 件)*

TWD1,146.00

(不含稅)

TWD1,203.30

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 加上 12 件從 2026年11月23日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
節省
1 - 11TWD1,146.00-
12 - 59TWD1,097.00TWD588.00
60 +TWD904.00TWD14,520.00

* 參考價格

RS庫存編號:
317-320
製造商:
RS PRO
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

RS PRO

Product Type

Air Switch

Sub Type

Air Switch

Mount Type

Surface

Contact Configuration

1 NO/1 NC

Series

RS PRO

For Use With

3 mm I/D Tubing, Battery Charging Rooms, Garages or Wherever Explosive Gases, Laboratories, Vapours or Powders May Exist

Standards/Approvals

UL

豁免

COO (Country of Origin):
GB

Air Operated Switches, 2-Pole Element, Surface Mount


The momentary action switch unit incorporates two SPDT microswitch contacts, one switch operating before the other, i.e. an increase in applied pressure on the actuator is required to operate the second switch

The alternate action switch unit incorporates two SPDT microswitch contacts, acting simultaneously

Each switch is rated at 15 A, 250 V ac. Mounted by four No. 4 self-tapping screws

Operating pressure 1.2 psi

Maximum pressure 15 psi

Actuators, Switch Elements, Tubing & Accessories


The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.

The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.

When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.

Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.

The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Note

The mounting screw length must not exceed 6mm otherwise the bellows may be punctured.

Approvals

UL

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。