STMicroelectronics Line Transceiver, Push Pull, 12-Pin VFDFPN
- RS庫存編號:
- 163-9771P
- 製造零件編號:
- L6362ATR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 750 件 (以卷裝提供)*
TWD68,100.00
(不含稅)
TWD71,505.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2,800 件從 2026年5月25日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 750 - 1495 | TWD90.80 |
| 1500 + | TWD89.20 |
* 參考價格
- RS庫存編號:
- 163-9771P
- 製造零件編號:
- L6362ATR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Product Type | Line Transceiver | |
| IC Type | Line Transceiver IC | |
| Input Type | Single Ended | |
| Output Type | Push Pull | |
| Mount Type | Surface | |
| Package Type | VFDFPN | |
| Minimum Supply Voltage | 7V | |
| Pin Count | 12 | |
| Maximum High Level Output Current | 310mA | |
| Maximum Supply Voltage | 36V | |
| Maximum Propagation Delay Time @ CL | 400ns | |
| Minimum Operating Temperature | -40°C | |
| Maximum Low Level Output Current | -310mA | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2 | |
| Height | 0.9mm | |
| Series | L6362A | |
| Length | 3mm | |
| Automotive Standard | No | |
| Supply Current | 2.3mA | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Product Type Line Transceiver | ||
IC Type Line Transceiver IC | ||
Input Type Single Ended | ||
Output Type Push Pull | ||
Mount Type Surface | ||
Package Type VFDFPN | ||
Minimum Supply Voltage 7V | ||
Pin Count 12 | ||
Maximum High Level Output Current 310mA | ||
Maximum Supply Voltage 36V | ||
Maximum Propagation Delay Time @ CL 400ns | ||
Minimum Operating Temperature -40°C | ||
Maximum Low Level Output Current -310mA | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2 | ||
Height 0.9mm | ||
Series L6362A | ||
Length 3mm | ||
Automotive Standard No | ||
Supply Current 2.3mA | ||
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment.
Fully protected
Reverse polarity
Overload with cut-off function
Overtemperature
Undervoltage and overvoltage
GND and VCC open wire
-40 to +125 °C operating ambient temperature
Selectable output stages:high-side, low-side, push-pull
Suitable to drive L, C and R loads
30 μF output load drive capability
Switching capability of inductors up to 500 mJ
Wake-up detection supported
Fast demagnetization of inductive loads