Honeywell SL1 Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac

RS庫存編號:: 808-7689
製造零件編號:: SL1-AK
製造商:: Honeywell Technologies

Honeywell SL1 Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac

查看所有Limit Switches

小計（1 件）*

TWD11,049.00

(不含稅)

TWD11,601.45

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

14 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD11,049.00

* 參考價格

RS庫存編號:: 808-7689
製造零件編號:: SL1-AK
製造商:: Honeywell Technologies

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell Technologies
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Snap-In
	Series	SL1
	Minimum Operating Temperature	-10°C
	Switching AC Voltage	24V ac
	Switching DC Voltage	24V dc
	Maximum Operating Temperature	70°C
	Width	59.8mm
	Standards/Approvals	EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1
	Length	18mm
	Depth	44.2mm
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Operating Force	11.8N
	Mounting Orientation	Side
	Mechanical Life	20000000Operations

	選取全部
	品牌 Honeywell Technologies
	Actuator Type Roller Plunger
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Snap-In
	Series SL1
	Minimum Operating Temperature -10°C
	Switching AC Voltage 24V ac
	Switching DC Voltage 24V dc
	Maximum Operating Temperature 70°C
	Width 59.8mm
	Standards/Approvals EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1
	Length 18mm
	Depth 44.2mm
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Operating Force 11.8N
	Mounting Orientation Side
	Mechanical Life 20000000Operations

Honeywell SL1 Series Limit Switch, Roller Plunger Actuator Type, Die Cast Zinc Housing - SL1-AK

This limit switch provides precise mechanical actuation for industrial control and safety interlocks, using a roller plunger actuator to detect linear motion and change electrical state. It is housed in a robust die-cast zinc enclosure with ingress protection suitable for harsh production environments, and employs a snap-action contact arrangement to deliver consistent switching behaviour at low voltages.

Features and Benefits:

• SPDT snap-action contacts deliver Rapid switching response and clear changeover
• IP67 enclosure ensures protection against dust ingress and temporary immersion
• 11.8 N operating force gives predictable actuation repeatability
• Mechanical life rated for 20,000,000 operations supports long duty cycles
• Operating range from −10 to 70 °C enables use across varied ambient conditions
• PG13.5 conduit entry provides a standard cable Interface for industrial wiring

Applications

• Suitable for position detection on automated assembly conveyors
• Ideal for end-of-travel switches on pneumatic actuators
• Used with motor control systems for safety interlock signalling
• Can be used for limit detection on packaging machinery
• Suitable for retrofit monitoring on industrial presses

How are electrical connections MADE to the device?

Terminals use a snap-in arrangement for secure, Compact wiring within control panels and enclosures.

What contact configuration is provided for integration with control logic?

A single-pole double-throw contact set supplies both normally open and normally closed paths for straightforward interfacing.

Which standards cover the device’s electrical and safety characteristics?

It meets recognised industrial switch standards covering electrical performance and operational testing.

Is the actuator orientation flexible for panel layout?

The unit is designed for side mounting to accommodate installation where lateral actuation is required.

Approvals

UL, CSA.