Honeywell Technologies BX Series Top-roller plunger Limit Switch, 1 NO/1 NC, IP67, Aluminium Housing, 600V ac, 6A

RS庫存編號:: 362-3252
製造零件編號:: BX4D3K
製造商:: Honeywell Technologies

Honeywell Technologies BX Series Top-roller plunger Limit Switch, 1 NO/1 NC, IP67, Aluminium Housing, 600V ac, 6A

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD40,315.00

(不含稅)

TWD42,330.75

訂單超過 $1,300.00 免費送貨

暫時缺貨

7 件從 2026年9月21日起裝運發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD40,315.00

* 參考價格

RS庫存編號:: 362-3252
製造零件編號:: BX4D3K
製造商:: Honeywell Technologies

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell Technologies
	Actuator Type	Top-roller plunger
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Aluminium
	Contact Type	Snap Action
	Terminal Type	M20
	Switching Current	6A
	Series	BX
	Switching AC Voltage	600V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Width	76.2mm
	Length	146.05mm
	Depth	73.18mm
	Standards/Approvals	UL, EAC, INMETRO, KOSHA, NEPSI, CE, CSA
	Hazardous Area Certification	ATEX
	Mounting Orientation	Front
	Operating Force	17.8N
	Conduit Entry	20 mm

	選取全部
	品牌 Honeywell Technologies
	Actuator Type Top-roller plunger
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Aluminium
	Contact Type Snap Action
	Terminal Type M20
	Switching Current 6A
	Series BX
	Switching AC Voltage 600V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Width 76.2mm
	Length 146.05mm
	Depth 73.18mm
	Standards/Approvals UL, EAC, INMETRO, KOSHA, NEPSI, CE, CSA
	Hazardous Area Certification ATEX
	Mounting Orientation Front
	Operating Force 17.8N
	Conduit Entry 20 mm

COO (Country of Origin):: US

Honeywell Series BX Limit Switch, 146.05mm Length, Aluminium Housing - BX4D3K

This limit switch is a Compact electromechanical device designed to detect position changes and provide Rapid electrical switching in industrial control systems. Housed in a robust aluminium enclosure with ingress protection suitable for harsh environments, it operates across a wide temperature span and offers a roller lever actuator for mechanical interfacing. It is intended for front-panel mounting and integrates a threaded Terminal entry for secure cable routing.

Features and Benefits:

• Snap-action contacts deliver fast, decisive switching at 6A capacity
• Rated for operation up to 600V AC for high-voltage control circuits
• IP67 enclosure protects internals from dust and temporary immersion
• Roller-lever actuator reduces wear when engaging moving parts
• Operating range from −40 to 70 °C supports temperature-variable sites
• Front-mount design with M20 Terminal enables tidy panel installation

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for actuator position sensing in pneumatic systems
• Used for safety interlock monitoring on access panels
• Can be used for limit detection in packaging machinery
• Used with motor control circuits requiring snap-action switching

What contact arrangement does it provide for control logic?

It features a single changeover arrangement with both a normally open and a normally closed contact to support Basic on/off and safety signalling.

How does the housing material influence installation choices?

The aluminium body offers a balance of mechanical strength and reduced weight, aiding installations where corrosion resistance and a sturdy enclosure are required.

What mounting orientation and entry method are supported?

The unit is intended for front mounting and uses an M20 threaded Terminal for cable entry and secure gland fitting.

Which certifications indicate suitability for hazardous environments?

It carries ATEX recognition Plus several international approvals that indicate compatibility with regulated industrial installations.

Group and Category

II 2 GD EEx d IIC T6

Certificate No.

SIRA 00 ATEX 1037

Approvals

UL, CSA, NEPSI