Honeywell GLE Series Steel Roller Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

This limit switch provides positive electrical feedback for position and safety control in industrial systems. It is designed for environments requiring robust actuation and discrete contact switching, combining a metal actuator with a sealed enclosure to perform reliably in harsh conditions.

• Steel roller actuator enables accurate mechanical engagement
• 2NO2NC snap action switch delivers reliable contact changeover
• IP67 sealing permits immersion protection in wet environments
• Switching capacity 240V and 6A supports common control circuits
• Mechanical life 10 million cycles reduces maintenance frequency
• Operates from -40°C to 85°C for wide thermal range applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit sensing on industrial presses and machinery
• Used with control panels requiring discrete position feedback
• Can be used for gate and door position monitoring in outdoor installations

The housing is die-cast zinc, providing impact resistance and structural strength for industrial settings.

Conduit connection is accommodated via a PG13.5 entry to simplify cable gland installation.

It is rated for switching DC voltages up to 250V and can handle typical control currents up to 6A.

The unit carries CE, UL, CSA and CCC approvals relevant to multiple regional standards.

UL/ UL listed for Canada

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.