Honeywell Technologies E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

RS庫存編號:: 217-7128
製造零件編號:: DTE7-2RN-PG
製造商:: Honeywell

Honeywell Technologies E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

小計（1 件）*

TWD19,552.00

(不含稅)

TWD20,529.60

訂單超過 $1,300.00 免費送貨

有庫存

2 件準備從其他地點送貨
加上 50 件從 2026年9月21日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD19,552.00

* 參考價格

RS庫存編號:: 217-7128
製造零件編號:: DTE7-2RN-PG
製造商:: Honeywell

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell
	Actuator Type	Pin Plunger
	Product Type	Limit Switch
	IP Rating	IP65
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Threaded Conduit
	Switching Current	10A
	Series	E7
	Minimum Operating Temperature	-30°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification	No
	Operating Force	1389g
	Conduit Entry	0.5 to 14 NPSM
	Mounting Orientation	Diagonal Side

	選取全部
	品牌 Honeywell
	Actuator Type Pin Plunger
	Product Type Limit Switch
	IP Rating IP65
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Threaded Conduit
	Switching Current 10A
	Series E7
	Minimum Operating Temperature -30°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Standards/Approvals EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification No
	Operating Force 1389g
	Conduit Entry 0.5 to 14 NPSM
	Mounting Orientation Diagonal Side

Datasheet - DTE7-2RN-PG

Honeywell Limit Switch, Pin Plunger Actuator, 680g Operating Force - DTE7-2RN-PG

This limit switch provides a robust means of detecting position changes and controlling circuits in industrial installations. Constructed for side-diagonal mounting, it employs a pin-plunger actuator and is intended for use where discrete switching is required under mechanical motion or presence detection. The enclosure gives environmental protection suitable for many factory and field settings.

Features and Benefits:

• Die cast aluminium housing delivers corrosion-resistant durability
• IP65 sealed enclosure resists dust and low-pressure water jets
• SPDT snap-action contacts enable Rapid make-and-break switching
• Rated for 10A at AC applications to handle moderate loads
• 250V DC switching capability supports DC control circuits
• Operating force of 680g ensures consistent actuation threshold

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for actuator position sensing in automated valves
• Used for safety cut-off sensing on packaging machinery
• Can be used for limit detection in material handling equipment
• Suitable for integration in control panels requiring threaded conduit entry

What conduit Interface does it provide for wiring?

The unit accepts threaded conduit connections sized 0.5-14 NPSM for secure cable entry.

How should it be mounted to align with mechanical linkages?

It is designed for diagonal side mounting to match common actuator geometries and reduce linkage stress.

What standards underpin its electrical switching design?

The switch conforms to EN/IEC 60947-5-1 functional switching requirements and carries relevant safety approvals.

What temperature range can it tolerate during operation?

It is specified to operate from a minimum of -30°C up to a maximum of 70°C without performance degradation.