Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

RS庫存編號:: 217-7103
Distrelec 貨號:: 304-22-790
製造零件編號:: 14CE1-Q
製造商:: Honeywell

Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

小計（1 件）*

TWD7,502.00

(不含稅)

TWD7,877.10

訂單超過 $1,300.00 免費送貨

暫時缺貨

12 件從 2026年9月14日起裝運發貨
加上 30 件從 2026年10月26日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD7,502.00

* 參考價格

RS庫存編號:: 217-7103
Distrelec 貨號:: 304-22-790
製造零件編號:: 14CE1-Q
製造商:: Honeywell

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP66, IP65, IP67, IP68
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	5A
	Series	14CE
	Minimum Operating Temperature	0°C
	Switching DC Voltage	28V
	Switching AC Voltage	250V
	Maximum Operating Temperature	70°C
	Depth	44mm
	Standards/Approvals	CE, EN 60947-5-1
	Width	44mm
	Length	16mm
	Hazardous Area Certification	No
	Mounting Orientation	Side
	Conduit Entry	20 mm
	Mechanical Life	10000000Cycles
	Operating Force	11.8N

	選取全部
	品牌 Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP66, IP65, IP67, IP68
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 5A
	Series 14CE
	Minimum Operating Temperature 0°C
	Switching DC Voltage 28V
	Switching AC Voltage 250V
	Maximum Operating Temperature 70°C
	Depth 44mm
	Standards/Approvals CE, EN 60947-5-1
	Width 44mm
	Length 16mm
	Hazardous Area Certification No
	Mounting Orientation Side
	Conduit Entry 20 mm
	Mechanical Life 10000000Cycles
	Operating Force 11.8N

Honeywell 14CE Series Limit Switch, 20mm Conduit Entry, Top Pin Plunger Actuator Type - 14CE1-Q

This limit switch is a compact, mechanically actuated device designed to detect position changes and provide reliable switching in industrial control systems. It is intended for gang mounting and offers snap-action contact operation with a top-mounted plunger actuator, suitable for environments requiring robust enclosure protection and routine switching of electrical loads.

Features and Benefits:

• Die-cast zinc housing delivers resilient enclosure protection
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response

Applications

• Suitable for conveyor end-of-travel detection in automation lines
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required

What electrical loads can it handle?

It switches AC loads up to 250V at 5A and DC loads up to 28 V, using a snap-action contact design suitable for typical control and signalling circuits.

How is the unit connected on-site?

Termination is via cable entry using a 20mm conduit interface, allowing straightforward field cabling and gland installation.

What temperature range is supported during operation?

The switch is designed to operate between 0 °C and 70 °C, accommodating common industrial ambient conditions.

Are there recognised standards applicable to its safety and performance?

It complies with EN 60947-5-1 and carries the CE designation, reflecting conformance to relevant European switch performance requirements.