Honeywell Technologies HDLS Series Rotary Head Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac,

RS庫存編號:: 193-2043
製造零件編號:: LS4A3K-1B
製造商:: Honeywell

Honeywell Technologies HDLS Series Rotary Head Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac,

小計（1 件）*

TWD17,734.00

(不含稅)

TWD18,620.70

訂單超過 $1,300.00 免費送貨

暫時缺貨

10 件從 2026年10月05日起裝運發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD17,734.00

* 參考價格

RS庫存編號:: 193-2043
製造零件編號:: LS4A3K-1B
製造商:: Honeywell

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell
	Product Type	Limit Switch
	Actuator Type	Rotary Head
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Terminal Type	M20
	Switching Current	10A
	Series	HDLS
	Switching AC Voltage	240V ac
	Switching DC Voltage	24V dc
	Minimum Operating Temperature	-12°C
	Maximum Operating Temperature	121°C
	Width	41.1mm
	Standards/Approvals	CE, CSA, UL
	Depth	62mm
	Length	106.7mm
	Hazardous Area Certification	No
	Operating Force	17.8N
	Mechanical Life	50000000Operations
	Mounting Orientation	Front

	選取全部
	品牌 Honeywell
	Product Type Limit Switch
	Actuator Type Rotary Head
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Terminal Type M20
	Switching Current 10A
	Series HDLS
	Switching AC Voltage 240V ac
	Switching DC Voltage 24V dc
	Minimum Operating Temperature -12°C
	Maximum Operating Temperature 121°C
	Width 41.1mm
	Standards/Approvals CE, CSA, UL
	Depth 62mm
	Length 106.7mm
	Hazardous Area Certification No
	Operating Force 17.8N
	Mechanical Life 50000000Operations
	Mounting Orientation Front

COO (Country of Origin):: US

Honeywell HDLS Series Limit Switch, IP67, 10A Switching Current - LS4A3K-1B

This limit switch provides rotary-actuated position detection for industrial control systems. Housed in a die-cast zinc enclosure with ingress protection suitable for harsh environments, it performs discrete switching tasks where a compact, front-mounted actuator is required. The device is built for repetitive mechanical operation and is applicable where snap-action contact behaviour and a simple changeover output are preferred.

Features and Benefits:

• SPDT snap-action contact for clear single-pole switching performance
• Rated for 10A at 240V AC enabling standard mains switching loads
• Switching capability at 24V DC for low-voltage control circuits
• Mechanical life rated to 50 million operations for extended service
• IP67 enclosure resists dust and temporary water immersion
• M20 Terminal entry supports secure glanded cable connections

Applications

• Suitable for conveyor end-of-travel detection on manufacturing lines
• Ideal for valve position monitoring in process plants
• Used with motor starters for limit-based interlocks
• Can be used for door or gate position sensing in access systems

What mounting orientation is required for correct operation?

It is designed for front mounting so the actuator is accessed from the device face during installation.

What operating temperature range can be expected in service?

The unit is specified for use between -12 °C and 121 °C, allowing operation in moderately cold to elevated temperature environments.

How much actuation force is needed to operate the mechanism?

The rotary head requires an operating force of 17.8 N to trip the internal contact mechanism.

What approvals cover electrical safety and market acceptance?

The switch carries CE, CSA and UL approvals, supporting deployment in multiple regulated markets.

Approvals

UL, CSA

Standards

EN60947-5-1, IEC947-5-1, AC15, A300 or A600 , DC13, Q300