Telemecanique Sensors XCSM Series Rotary Lever Limit Switch, 1 NO/2 NC, IP67, IP68, IP66, Metal Housing, 400V ac, 6A

RS庫存編號:: 133-0065
製造零件編號:: XCSM3915L5
製造商:: Telemecanique Sensors

Telemecanique Sensors XCSM Series Rotary Lever Limit Switch, 1 NO/2 NC, IP67, IP68, IP66, Metal Housing, 400V ac, 6A

小計（1 件）*

TWD4,373.00

(不含稅)

TWD4,591.65

訂單超過 $1,300.00 免費送貨

有庫存

6 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD4,373.00

* 參考價格

RS庫存編號:: 133-0065
製造零件編號:: XCSM3915L5
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Rotary Lever
	Contact Configuration	1 NO/2 NC
	IP Rating	IP67, IP68, IP66
	Housing Material	Metal
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	6A
	Series	XCSM
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	400V ac
	Switching DC Voltage	300V dc
	Maximum Operating Temperature	+70°C
	Length	30mm
	Depth	94mm
	Width	30mm
	Standards/Approvals	RoHS
	Hazardous Area Certification	No
	Conduit Entry	M20
	Mechanical Life	10000000Cycles
	Mounting Orientation	Horizontal
	Operating Force	35N

	選取全部
	品牌 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Rotary Lever
	Contact Configuration 1 NO/2 NC
	IP Rating IP67, IP68, IP66
	Housing Material Metal
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 6A
	Series XCSM
	Minimum Operating Temperature -25°C
	Switching AC Voltage 400V ac
	Switching DC Voltage 300V dc
	Maximum Operating Temperature +70°C
	Length 30mm
	Depth 94mm
	Width 30mm
	Standards/Approvals RoHS
	Hazardous Area Certification No
	Conduit Entry M20
	Mechanical Life 10000000Cycles
	Mounting Orientation Horizontal
	Operating Force 35N

Telemecanique Sensors XCSM Series Limit Switch, IP67, IP68, IP66, 6A Switching Current - XCSM3915L5

This limit switch provides a rugged electromechanical end-of-travel sensing solution for industrial machinery, using a rotary lever actuator to detect positional changes and trigger electrical contacts in demanding environments. It is designed for horizontal mounting and connects via a cable terminal, making it suitable for conveyor systems, Gates and equipment requiring end-stop detection where sealed protection and straightforward installation are needed.

Features and Benefits:

• Metal enclosure delivers Durable protection for industrial settings
• Snap-action contacts enable fast switching response and clear state change
• Contact arrangement offers 1NO/2NC for flexible control schemes
• Withstand switching at 300Vdc and 400Vac for diverse circuits
• Rated for 6A switching current to handle common load demands
• Mechanical life of 10,000,000 cycles reduces replacement frequency

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for position sensing on automated gate assemblies
• Used with motor starters for overtravel safety interlocks
• Can be used for packaging machine limit detection tasks
• Employed in material handling stops and end-limit control

What ingress protection levels does it provide for wet environments?

It carries IP67, IP68 and IP66 ratings permitting temporary immersion, continuous immersion conditions depending on installation and protection against powerful water jets.

Which conduit and cable arrangements are compatible with this device?

The unit accepts an M20 conduit entry and uses a cable Terminal for direct cable termination.

What temperature range can it operate within reliably?

It functions across an ambient range from −25°C up to +70°C without degradation of switching performance.

How is the switch mounted and oriented for correct operation?

It is intended for horizontal mounting to align the rotary lever actuator with the mechanical interface.

Which regulatory approval is indicated for material and manufacturing controls?

The product complies with RoHS requirements for restricted substances.

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Approvals

UL, CSA.

Standards

CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.