Telemecanique Sensors XCMH Series Plunger Limit Switch, 2 NC, IP66, IP67, Plastic Housing, 240V ac, 0.1A, 0.75 A

RS庫存編號:: 194-121
製造零件編號:: XCMH2910L1
製造商:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 2 NC, IP66, IP67, Plastic Housing, 240V ac, 0.1A, 0.75 A

小計（1 件）*

TWD2,327.00

(不含稅)

TWD2,443.35

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2027年1月08日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD2,327.00

* 參考價格

RS庫存編號:: 194-121
製造零件編號:: XCMH2910L1
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	2 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.1, 0.75A
	Series	XCMH
	Switching DC Voltage	300V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Depth	60mm
	Length	16mm
	Standards/Approvals	IEC 60947-5-1 UL 508 CSA C22.2 No 14 IEC 60204-1
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	42.5N
	Conduit Entry	M20
	Mounting Orientation	Vertical

	選取全部
	品牌 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 2 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.1, 0.75A
	Series XCMH
	Switching DC Voltage 300V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Depth 60mm
	Length 16mm
	Standards/Approvals IEC 60947-5-1 UL 508 CSA C22.2 No 14 IEC 60204-1
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 42.5N
	Conduit Entry M20
	Mounting Orientation Vertical

Datasheet - XCMH2910L1

登入下載 CAD 模型

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 240V AC Switching Voltage - XCMH2910L1

This limit switch is a compact industrial position sensor designed for vertical mounting to detect mechanical movement using a plunger actuator. It is intended for incorporation into machinery control circuits where a snap-action contact is required for reliable switching in manufacturing and automation environments. The unit is constructed with a plastic enclosure suited to demanding workplaces and offers a conduit entry for secure wiring.

Features and Benefits:

• Snap-action contacts provide rapid state change and low bounce
• Two normally closed contacts enable fail-safe circuit arrangements
• Rated for 300V DC and 240V AC switching for versatile load compatibility
• Operating force of 42.5N ensures positive actuation under load
• Mechanical life of 5,000,000 cycles supports long-term repetitive use
• IP66 and IP67 protection allows operation in wet and dusty conditions

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for guard-door interlocks on assembly equipment
• Used with hydraulic presses for position feedback
• Can be used for automated packaging line position sensing
• Appropriate for safety cut-outs on machine tools

What temperatures can it operate within safely

It functions from -25°C up to 70°C, covering typical indoor and many outdoor industrial climates.

How is the device wired into control systems

It provides two normally closed contacts with snap-action switching

electrical connection is made via an M20 conduit entry for protected cable routing.

What approvals support industrial installation

The design aligns with IEC 60947-5-1 and IEC 60204-1 standards and meets UL 508 and CSA C22.2 No 14 approvals for electrical equipment.

What mounting orientation is required for correct operation

It is intended for vertical mounting to ensure proper plunger actuation and repeatable switching behaviour.