- RS庫存編號:
- 832-6533
- 製造零件編號:
- K4672BRC
- 製造商:
- MK Electric
查看所有Light Switches
當前暫無庫存,可於07/12/2023發貨,6 工作日送達。
單價(不含稅) 個
TWD743.00
(不含稅)
TWD780.15
(含稅)
單位 | Per unit |
1 - 9 | TWD743.00 |
10 - 24 | TWD714.00 |
25 + | TWD686.00 |
- RS庫存編號:
- 832-6533
- 製造零件編號:
- K4672BRC
- 製造商:
- MK Electric
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
10A Flush Switches
The MK Electric Albany Plus range of plate switches features stylish curved design, the switches are manufactured from the finest materials and maintain their high quality appearance for years to come. These MK switches do not have to be derated when used with fluorescent or inductive loads. The terminals in the back of these plate switches have a funnel entrance and are upwards facing, to make installation easier. The Albany Plus decorative switches will look great in both contemporary and classic interiors.
10A Plateswitches
Flush mount
Can be wired as either one way or two ways
Flush mount
Can be wired as either one way or two ways
Standards
BS EN 60669-1: 2000
MK Albany Plus Range
Manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest decor.
3-pin operated safety shutter on all sockets
In-line terminals which are top facing enable wires to be cut to same length and allow easy screwdriver access
All screws are backed out and captive for ease of installation One screwdriver fits all products
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safe switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
In-line terminals which are top facing enable wires to be cut to same length and allow easy screwdriver access
All screws are backed out and captive for ease of installation One screwdriver fits all products
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safe switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
規格
屬性 | 值 |
Number of Gangs | 2 |
Light Switch Type | Rocker Light Switch |
Number of Ways | 2 |
Number of Poles | 1 |
Current Rating | 10A |
Mount Type | Flush |
Series | Albany Plus |
Finish | Brushed |
Length | 86mm |
Fixing Standard | BS Standard |
Height | 86mm |
Number of Modules | 1 |