Omron F3SG Series Light Curtain Receiver, Sender, 64 Beam(s), 30 mm Resolution

This light curtain is a safety receiver designed to create a protected detection zone for industrial machine guarding. It operates as a Type 2 safety device with a high beam count to detect intrusions and stop hazardous motion. The unit is intended for integration into control systems where rapid detection and compact form are required.

• 64 beams provide fine object detection and reduced nuisance stops
• 30mm beam resolution enables detection of small obstructions
• 7ms maximum response time supports quick machine stoppage
• 0.3m minimum scanning distance allows close-proximity protection
• 20m maximum protective width accommodates wide access areas
• 28.8V maximum supply voltage permits integration with standard safety supplies

• Suitable for guarding moving press and stamping machines
• Used for pedestrian access protection on automated lines
• Ideal for perimeter safety on conveyor transfer zones
• Can be used for safeguarding robotic workcells
• Suitable for retrofitting existing safety control systems

It uses a four-pin connector terminal for signal and power interfacing with safety relays or controllers.

The receiver has a slim cross-section with a 35mm height and width to facilitate narrow-profile installation alongside other guarding devices.

The device provides a protective height of 1.31m, enabling coverage of typical access zones without additional modules.

The receiver supports scanning across distances up to 20m to suit extended machine layouts.